RunRyder RC
 5  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1182 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Titanium 50 Collective Push-Pull on R60-90?
02-11-2006 10:35 AM  12 years agoPost 21
Linley

rrApprentice

Rockville Centre - LongIsland, New York

My Posts: All  Forum  Topic

Dual Collective Setup
I have used this setup for a couple years now and it really does work

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-11-2006 02:17 PM  12 years agoPost 22
ESWLFSE

rrElite Veteran

Liberty Hill, TX

My Posts: All  Forum  Topic

^^That scares me because the pushrods are unequal length. It seems to me they would have to bind somewhat somewhere in their travel, but maybe it is so little its unnoticeable.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2006 04:37 PM  12 years agoPost 23
MrDrift

rrApprentice

Holly, Mi

My Posts: All  Forum  Topic

The unequal length isn't a problem. I had a Venture 50 with CCPM and the two rear swash links were different lengths because one servo was mounted higher in the frame then the other. The swash stayed level through the full pitch movement, so it has no effect...

PM  EMAIL  Attn:RR  Quote
02-11-2006 05:37 PM  12 years agoPost 24
Linley

rrApprentice

Rockville Centre - LongIsland, New York

My Posts: All  Forum  Topic

Dual Collectivbe Setup
Both servos work in perfect unison at all points. The 9Z radio and Pmix feature makes this very easy. Iam sure most radios are capable of this. The Pmix has a linear curve but you can modify some of the points to assure that the slave servo is following the master servo perfectly through each point. What I do is to remove the slave ball link and set is close to the ball, then cycle the collective and observe that the ball link is in perfect center of the of the ball

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1182 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Titanium 50 Collective Push-Pull on R60-90?
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Wednesday, June 20 - 6:16 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online