RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 694 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › MicroHeli Pro Tail problem.
02-09-2006 09:46 PM  12 years agoPost 1
abormor

rrNovice

Gandia, Valencia, Spain

My Posts: All  Forum  Topic

I have just bought a MH-TX4142TSP Pro Tail from modefosheli and I had two problems just after fixing it to my heli.

It had a lot of vibration which was impossible to solve with blade balancing.
As you can see in the picture I noticed that there is a very subtle but noticeable divergence on the pitch slider which makes one of the tail blades to have more pitch angle than the other and a difficult vibration to solve. I have lost the instructions that came with the upgrade so I am unable to know how to repair this if it is possible, I will appreciate some help or instructions photo...

The other problem was that due to vibration the tail pitch slider arm lost its pressure pin and began to rotate free. ¿wouldn't be better a screw there?
In resume, at the moment, an upgrade that has left the heli at home and seems that wont be flying this weekend.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 09:49 PM  12 years agoPost 2
keyz

rrVeteran

, UK

My Posts: All  Forum  Topic

post your issue here m8

http://www.runryder.com/t227136p1/

lol

nice eolo btw

If you need to get high , go and fly !

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 03:09 AM  12 years agoPost 3
Jon the Rooster

rrElite Veteran

Johns Island, Charleston, SC

My Posts: All  Forum  Topic

Surely you've had to have read the issues with the Pro Tail pins comming out. I did, but bought one anyways. Dissasembled & re-assembled with locktight and used a little J&B Weld on both ends of both pins. Just for piece of mind I know I schouldn't have to modify a part that's supposed to work but, it is the BEST tail control you can get. So far I'm TOTALY STOKED!!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 04:30 AM  12 years agoPost 4
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

That peice off in your picture just attaches the slider to the grips, it does not variate the pitch angle in any way static wise on hookup. I have two of these and you made me look, lol.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 08:18 AM  12 years agoPost 5
abormor

rrNovice

Gandia, Valencia, Spain

My Posts: All  Forum  Topic

That lever of is only one of the problems.
The slight divergence in the pitch slider is what makes a differece in pitch angle between tail blades.
I don´t know how to repair this, if you have the manual please scan it and send me a photo to see how to screw that to make it perpendicular to the slider.
thanks for your comments

I post this thread to:
http://www.runryder.com/t227136p1/

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 694 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › MicroHeli Pro Tail problem.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, June 24 - 12:49 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online