RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 794 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › I got a Logo 10 E with the TP stuff..now what?
02-09-2006 06:44 PM  12 years agoPost 1
Shun

rrApprentice

Houston, Tx

My Posts: All  Forum  Topic

Well I got one...and can anyone comment on this setuP?
Logo 10 3D kit
1 Neu 1512/2y/f Motor
1 Kool Flight Ultimate BEC
1 Mikado Pinion 18 tooth .5 mod
1 Jazz 55/10/32 Spd. Cntrl.
1 Carbon frame set from TP Packs
4 5s1p prolite 2100 pks
not sure on servo's...I would like to run the 9650's
and I have a 9254 and a 401 for the tail
as I am a little new to the larger electrics...not sure what to expect out of this one..need to get a charger and such as well as looking at the tp site seems I need the 16 t pinion

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 09:27 PM  12 years agoPost 2
Thuvanduc

rrApprentice

Salt Lake City, Utah

My Posts: All  Forum  Topic

Shun, if I was you I use the TP 10s2p packs. The 9254 for the rudder is more than good for the application, so drop the 9650 and save some money. Charger, go for a good one like the Orbit-Pro or the Schulze. With these high end charger, you will not have to worry about cells unbalance, overcharge, and other problems that low cost chargers have. And you also need a power supply as well.

Duc

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 09:49 PM  12 years agoPost 3
Shun

rrApprentice

Houston, Tx

My Posts: All  Forum  Topic

Thanks bud..im going with the 9254 on tail it's the cyclics im talking about as for servo choice...also I wish I had posted before but I have just bought 4 5s1p 2100 prolites, what is the drawback or why do u say 10s2p,what about the tp1010c charger?
What do u mean by power source...what do u sugguest Thuvancuc?
I have a 12wl battery is that not enough?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 10:01 PM  12 years agoPost 4
Sig Dawg

rrApprentice

Yorkton, Sask., Canada

My Posts: All  Forum  Topic

With a 10S setup you need to run the box. Or were you planning on using each of the 4 5S packs individually? A 5S setup would work very well depending on flying style.

Jason

PM  EMAIL  Attn:RR  Quote
02-09-2006 10:08 PM  12 years agoPost 5
Thuvanduc

rrApprentice

Salt Lake City, Utah

My Posts: All  Forum  Topic

10S2P is all out power for 3D flying. A power supply will give you steady 14volts supply when charging at home. Unless you use your car battery, stand along 12v battery will not provide steady voltage supply and will hurt your expensive packs.

Duc

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 10:12 PM  12 years agoPost 6
Shun

rrApprentice

Houston, Tx

My Posts: All  Forum  Topic

so the pack sI got will make 10s1p or 10s 2p?
what type of power supply do I need, definitely don't want to ruin the packs

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 12:22 AM  12 years agoPost 7
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

10S2P is for the L14, you mean 10S1P. ANd as far as your setup goes for a recommended battery get ahold of Gary with TP packs and he will guide you to the exact pinion and battery you need.

Don't quote me on this but I think that motor combo you have will be more for the 6S2P, check with Gary they sell this exact stuff you have regularly.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 12:36 AM  12 years agoPost 8
Shun

rrApprentice

Houston, Tx

My Posts: All  Forum  Topic

Yeah looking on the site the setup I have is for the 10s1p using (2) 5s1p 2100 prolite packs...the motor pinion they are using on the site is the 16tooth I have is the 18 tooth...so may need a the 16 as it will give me their quoted hd of 2100

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 794 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › I got a Logo 10 E with the TP stuff..now what?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 24 - 12:22 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online