RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 399 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › need help setting TJ pro with 3810
02-09-2006 04:13 PM  12 years agoPost 1
Branzzz

rrVeteran

Singapore

My Posts: All  Forum  Topic

i've been trying to set the TJ pro on my raptor 50 and 3810 for the entire day, and i don't have any idea what i'm doing

i tried following the instructions on the ma website but the TJ green light keeps coming on at very low stick, definatly not the 25% throttle that's supposed to be. what can i do?

the radio was set according to http://www.modelavionics.com/Jockey...ps/JR_X8103.htm

Raptor 50V2
OS 50SX-Hyper
GY502/9253
Hitec 6975
Airtronics ERG-VB
JR 3810

PM  EMAIL  Attn:RR  Quote
02-09-2006 07:15 PM  12 years agoPost 2
Grant H

rrKey Veteran

Madison, WI

My Posts: All  Forum  Topic

i tried following the instructions on the ma website but the TJ green light keeps coming on at very low stick
You are not in idle up, might you?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 07:39 PM  12 years agoPost 3
AzHyper

rrKey Veteran

Peoria, Az.

My Posts: All  Forum  Topic

JR radios use a non-digital throttle trim. I always set up my throttle linkage so that it idles at half trim. Then you CALIBRATE your TJ with the trim at half also. This will then push the rule of engagement back up to the 25% point. Make sure of 2 things: 1) end-points for throttle s/b near 100% on low AND high, 2) your throttle curve goes from 0% to 100% during calibration.

PM  EMAIL  Attn:RR  Quote
02-09-2006 11:12 PM  12 years agoPost 4
Branzzz

rrVeteran

Singapore

My Posts: All  Forum  Topic

i've got a push pull on the throttle already, the atvs are 79/92, are they fine? how can i max out the atvs?

Raptor 50V2
OS 50SX-Hyper
GY502/9253
Hitec 6975
Airtronics ERG-VB
JR 3810

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 399 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › need help setting TJ pro with 3810
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, June 22 - 6:13 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online