RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 539 views POST REPLY
HomeAircraftHelicopterHIROBOOther › tail blade play
02-09-2006 04:13 AM  12 years agoPost 1
BJames111

rrElite Veteran

San Diego, California

My Posts: All  Forum  Topic

I noticed that i have a lot of play in my tail blades, and so I took them apart and discovered that I (in my hasty build) forgot to install the .5mm washers between the thrust bearing and the main bearing in the tail grip. Does anyone have two of these washers they can spare? Or let me know where i can get some?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-09-2006 04:36 AM  12 years agoPost 2
Kokamo

rrApprentice

Liberty Hill Tx

My Posts: All  Forum  Topic

What did you do with these washers? They should have come with the kit.

Also, what machine are we talking about?

Joe

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 04:38 AM  12 years agoPost 3
BJames111

rrElite Veteran

San Diego, California

My Posts: All  Forum  Topic

my evo 30. I know they should have come with the kit, but I think I must have lost them. how i didn't notice they were gone, i don't know...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-09-2006 05:24 AM  12 years agoPost 4
Kokamo

rrApprentice

Liberty Hill Tx

My Posts: All  Forum  Topic

Just to let you know, there is supposed to be a little slack in the tail blades. You should have two washers with one thrust bearing. Make sure you have the washers turned on the correct side.

If I remember right it should go....

washer -----
bearing *****
washer -----


Hope this helps. If you have in fact lost the washers, you might look in the back of your manual for the correct part number, and then get over to Rick's rc and see if they have the part numbers you need. I belive they have every individual part you would ever need for your Evo.

Hope I have helped,

Joe

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2006 03:20 PM  12 years agoPost 5
BJames111

rrElite Veteran

San Diego, California

My Posts: All  Forum  Topic

Actually the thrust bearings are ok, there is supposed to be a .5mm flat washer..that's the one i was wondering about.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-10-2006 05:07 AM  12 years agoPost 6
BJames111

rrElite Veteran

San Diego, California

My Posts: All  Forum  Topic

no one has one of these tiny washers...? come on guys help me out!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-10-2006 12:03 PM  12 years agoPost 7
RayJayJohnsonJr

rrKey Veteran

Midwest

My Posts: All  Forum  Topic

http://www.ronlund.com/Merchant2/me...ct_Code=2506005

-Mark

There, their and they're. It's really that simple.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 03:53 PM  12 years agoPost 8
BJames111

rrElite Veteran

San Diego, California

My Posts: All  Forum  Topic

thanks!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 539 views POST REPLY
HomeAircraftHelicopterHIROBOOther › tail blade play
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Friday, June 22 - 2:37 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online