RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2091 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoOther › hacker outrunner and logo 10????
01-13-2006 03:51 PM  13 years ago
Topic Vote0Post 1
mrbisset

rrNovice

Huntsville, AL

MyPosts All Forum Topic
hacker outrunner and logo 10????
Will the A30 Hacker outrunners work well with a logo 10? I know they are recommended for the swift, and I hear these heli's are alike? They are under $100 for a motor seems like a deal compared to others...

thanks
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2006 04:39 AM  13 years ago
gliderking

rrNovice

San Diego, CA

MyPosts All Forum Topic
At the AMA show this afternoon, I picked up a Logo 10, Hacker A30 8XL and Hacker Master 40-0-heli for $399 from Aero-Model. Moving down the power curve perhaps?, Sean mentioned that it would be fine... but then again, fine is four letter word that begins with 'f'. Anyone else use this setup?

Bob
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-14-2006 11:47 AM  13 years ago
LogoHeli

rrVeteran

Brisbane, Queensland, Australia

MyPosts All Forum Topic
gliderking
what batteries r you going to use? (lithium?).

Keep us posted
heli+ground/heli+tree/heli+bush=not good
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2006 01:36 AM  13 years ago
twohsieh

rrNovice

Irvine, california

MyPosts All Forum Topic
aeromodel recommends 4s or 5s with a30-8xl
SHARE  PM  EMAIL  Attn:RR  Quote
01-15-2006 05:39 AM  13 years ago
gliderking

rrNovice

San Diego, CA

MyPosts All Forum Topic
probably 4s, but was also curious about pinion combos...
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-15-2006 05:54 AM  13 years ago
LogoHeli

rrVeteran

Brisbane, Queensland, Australia

MyPosts All Forum Topic
What performance would you expect with a 4s/5s setup? Mild Aerobatics, 3D? Can anyone give a brief comparison with an A30 with something like a C50-13L?

Appreciated:)
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2006 11:47 PM  13 years ago
rickyblaze

rrApprentice

Bloomington Indiana

MyPosts All Forum Topic
I have the Swift with the A30-8xl and on 12 cell nihm it's by no means a power house and a little better with 4s3p lipos. I have a Logo10/B50-13L and it runs much better on the same cells. The A30 is a basic setup for the Swift so I can't imagine it being a real killer on the Logo10.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-17-2006 12:56 AM  13 years ago
gliderking

rrNovice

San Diego, CA

MyPosts All Forum Topic
burned by the bargain....
live and learn one more time, you get what you pay for.....
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-17-2006 02:24 AM  13 years ago
mrbisset

rrNovice

Huntsville, AL

MyPosts All Forum Topic
Rickyblaze,
Is that a boxed setup that you say performs better? Or just straight hacker 50?

GLiderking,
so do you wanna sell your underpowered combo? haha

Where can I get a logo for $199??

thanks,
Caleb
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-17-2006 09:26 AM  13 years ago
LogoHeli

rrVeteran

Brisbane, Queensland, Australia

MyPosts All Forum Topic
too good to be true then oh wellheli+ground/heli+tree/heli+bush=not good
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-17-2006 10:26 AM  13 years ago
ozace

rrKey Veteran

melbourne, australia

MyPosts All Forum Topic
I have both Swift and Logo 10 and the A30-xl. In my view it is too small for either. The motor will get the heli in the air but not much more. Unfortunatly with bigger E helis there are no cheap options

(The A30 is for a Lipoly V2 which is a much smaller, lighter heli)
we can never have too many, can we ?
SHARE  PM  EMAIL  Attn:RR  Quote
01-17-2006 11:19 AM  13 years ago
Dr Lodge

rrElite Veteran

Guildford, Surrey - UK

MyPosts All Forum Topic
I have the B50-14L, running on 6s2p, the box and 13T pinion. Headspeed is a calm 1500 but very consistent - no bogging whatever. Great for mild/smooth 3D and 15 mins duration.Vibe 90, Vibe 50, Vigor CS x2,
Dyna-x, Knight 503D, Logo 10,
TRex 500, Furion, Gaui EP200
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-17-2006 03:04 PM  13 years ago
mrbisset

rrNovice

Huntsville, AL

MyPosts All Forum Topic
outrunners
Is there any good outrunners for a logo 10?

Is everone in aggreement that they are better for heli's because of the lower RPM's? (No need for a box) And do they cool better?

I hear hacker has new outrunners coming out...A40 and A50!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-17-2006 03:26 PM  13 years ago
rickyblaze

rrApprentice

Bloomington Indiana

MyPosts All Forum Topic
My B50-13l is a straight pinion to spur setup. Your right the A30 is enough to get it in the air and that's about it. My swift flys good it's just under powered in my opinion with the A30. I'm looking at the 1910-1y Neu motor for mine now or the 1907-1.5y Askman ran a spread sheet on the 1910-1y and compared it to the A30, beats it hands down but your talking about $165 which I should have done to begin with
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-17-2006 05:37 PM  13 years ago
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

MyPosts All Forum Topic
hey , I do know someone trying the 50 size hacker outrunner in the logo , but dont know which one yet , Im thinking its the logo 14
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-17-2006 06:23 PM  13 years ago
gliderking

rrNovice

San Diego, CA

MyPosts All Forum Topic
For future reference, when someone searches this topic, they'll have the combo recommended by aero-model.

I'll give this a try, but will most likely bump it up asap.

> Dear Bob,
> You will need a 23 tooth pinion on a 4S4P LiPo pack for the 8XL in
> the Logo 10.
>
> Thank You,
> Chris Wheeler
> Hacker Brushless USA
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-17-2006 08:53 PM  13 years ago
Kyna

rrNovice

Tempe,AZ-USA

MyPosts All Forum Topic
LOGO 10 Basic Set-Up
The LOGO 10 Deluxe with an A30-8XL+cooling fan, and a Hacker Master 40-Heli ESC is fully capabale of basic sport flying. This system will allow you to perform loops, rolls and a solid hover. This set up requires a 23 tooth pinion on a 4S3P Prolite pack. You must also adjust the timing on the esc to the maximum 30 degrees.

This system is not intended for full 3-D, it is our basic set up and was advertised as so.

Best Regards,

Kyna Veatch
Office Manager
Aero-Model/Hacker Brushless USA
SHARE  PM  EMAIL  Attn:RR  Quote
01-18-2006 07:49 AM  13 years ago
LogoHeli

rrVeteran

Brisbane, Queensland, Australia

MyPosts All Forum Topic
If someone could advise me, then i think i may be interested in this motor (its a deal cheaper than other hackers).

What about a 4S2P 5000mah with the 8xL. What pinion would i use?
I'm just wanting light aerobatics for this one-inverted flight, loops, rolls, solid hover and cruising, etc. In other words, what performance would i expect?

looks promising though
Appreciated
heli+ground/heli+tree/heli+bush=not good
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-18-2006 07:55 AM  13 years ago
ozace

rrKey Veteran

melbourne, australia

MyPosts All Forum Topic
Logo, call Brian in perthrc. He is the aussie hacker man and you will be very surprised at the price, i know i was.we can never have too many, can we ?
SHARE  PM  EMAIL  Attn:RR  Quote
01-18-2006 09:19 AM  13 years ago
LogoHeli

rrVeteran

Brisbane, Queensland, Australia

MyPosts All Forum Topic
OZace
are you saying that the price is a good thing, or bad?

A C50-13L is something like $350AUD, which is a big difference to a A30's $100 or so.
heli+ground/heli+tree/heli+bush=not good
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2091 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoOther › hacker outrunner and logo 10????
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Friday, September 20 - 5:03 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online