RunRyder RC
WATCH
 1 page 644 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignOther › Canopy ?
11-09-2005 06:32 PM  14 years ago
Topic Vote0Post 1
OsiViper

rrVeteran

Farmington, NM

MyPosts All Forum Topic
Canopy ?
What is the best way to attach the clear shield to the Canopy on the Trex? i got it all trimmed i just need a way to attach it
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-09-2005 06:47 PM  14 years ago
stpeteheli

rrApprentice

St. Petersburg, FL

MyPosts All Forum Topic
Some use CA, some use canopy glue and some use small screws. I like to put a small amount of canopy glue at the top and bottom (where I will put screws) to hold canopy before making the screw holes. Then I use my xacto knife with a #11 blade to make small holes, one at top and one at bottom. I then use the small black screws from Hitec HS50,55 servos. Some also use the small black screws from the plastic blade roots on Align wooden blades after a crash.Swift C550, Z30A-800 11T, CC45HV, 7s MaxAmp - 8s eMoli, DX7
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-09-2005 09:08 PM  14 years ago
Ozydego

rrKey Veteran

Westerville, Ohio

MyPosts All Forum Topic
I use the small screws that come in the kit, I use my smallest drill bit, tape the windshield to the canopy, then drill my holes... I then just screw the windshield on.... I just like the way it looks, some prefer CA or shoe goo, or canopy glue like stpete does...
But Honey, I can't live with just stock.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-09-2005 09:08 PM  14 years ago
JeepRubicon2k3

rrApprentice

CONUS

MyPosts All Forum Topic
Heat up a paperclip till its red hot then push it through the windshild and canopy, walla instant screw holes.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 644 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignOther › Canopy ?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, July 10 - 11:42 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online