RunRyder RC
WATCH
 1 page 632 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › OEM parts - Helikraft
10-14-2005 05:53 PM  12 years agoPost 1
ipeca

rrNovice

France

My Posts: All  Forum  Topic

Hello,

What do you think about OEM parts on Helikraft ?? Do the quality is the same to TT parts ??

Thanks

Eric

PM  EMAIL  Attn:RR  Quote
10-14-2005 05:57 PM  12 years agoPost 2
blockatvalpo

rrKey Veteran

Reston, VA

My Posts: All  Forum  Topic

All of the parts I have ordered from there were perfect. I had no problem using them on my Raptor 30. To make it worth your while, order a bunch, because shipping is pretty expensive.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2005 05:59 PM  12 years agoPost 3
Salty

rrElite Veteran

St. Augustine

My Posts: All  Forum  Topic

didnt we already cover this? we did but we will again...

OEM= Original Equipment

aftermarket= someone else made it

which means

OEM= TT parts same thing....

Ask your Doctor if getting off your ass is right for you.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2005 08:05 PM  12 years agoPost 4
PietervA

rrVeteran

New Zealand

My Posts: All  Forum  Topic

All John's stuff seems good to me. Exception is the bulk buy mainshafts; I'd stick to OEM or hardened shafts, IIWY.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2005 08:31 PM  12 years agoPost 5
Temjin

rrApprentice

Walnut CA, HsinChu Taiwan

My Posts: All  Forum  Topic

I don't see why TT will sell their stuff without the package to get less money...



Life is short. Offend as many people as you can. - Tom Leykis

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2005 09:43 PM  12 years agoPost 6
ipeca

rrNovice

France

My Posts: All  Forum  Topic

hi,

I put this question because the spindle shaft TT (pv0355) are black but in the EOM version they are chrome...

Eric

PM  EMAIL  Attn:RR  Quote
10-15-2005 03:45 AM  12 years agoPost 7
playfair

rrKey Veteran

Rochester, NY

My Posts: All  Forum  Topic

I'll bet there's other places making some of those parts... I've noticed the paint scrapes off the bulk tailbooms a little easier (though who cares for $4 as they don't last too long anyway :c)

A bud and I ordered a bunch of parts earlier in the year including 10 spindles, which came to us black like the stock TT ones. However, most had a slight taper which required pressing the bearing on with a hammer, and they were a good mm too long. I wrote John, and he admitted to a bad batch and immediately sent out the plain steel ones FOC which are working great!


The sky is our canvas

PM  EMAIL  GALLERY  Attn:RR  Quote
10-15-2005 04:09 AM  12 years agoPost 8
nojohnny101

rrElite Veteran

10 miles north of Cincy, OHIO

My Posts: All  Forum  Topic

hey
I wrote John, and he admitted to a bad batch and immediately sent out the plain steel ones FOC which are working great!
this is what proves a company in a industry....admitting when they made a mistake and did something wrong

most companies would just give you the run around


the same thing happened to me somewhat....got some defective frames....even though i flew them....he sent me a brand new pair...no charge...and paid for the shipping back of the old frames

Thanks
~Will~

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-15-2005 10:32 AM  12 years agoPost 9
rob10000

rrKey Veteran

Western Massachusettes

My Posts: All  Forum  Topic

What was defective about a new set of frames?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-15-2005 04:21 PM  12 years agoPost 10
nojohnny101

rrElite Veteran

10 miles north of Cincy, OHIO

My Posts: All  Forum  Topic

hey
the bearing blocks were jsut not molded correctly so the gear lash was wrong...

it probably could of been just run (it was tight) and it probably would of worn itself in but i didn't want to do it like that


it was no big deal and john took care of me

Thanks
~Will~

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 632 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › OEM parts - Helikraft
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, September 24 - 4:30 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online