RunRyder RC
WATCH
 1 page 529 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Set screw problem with Greenies?
10-13-2005 01:17 AM  13 years agoPost 1
HGlider

rrNovice

Durango, Colorado

My Posts: All  Forum  Topic

Put on some greenie paddles recently. Soooo nice now.
But I noticed the plastic is noticeably softer and when I tightened the set screws, and not hard even, is that they seemed to slip (strip?). On the black and even the white paddles they seemed to grip harder to the flybar. So to be safe I ca'd it where the rod enters the paddle and on the inspection hole. Only way to be sure if it's tight is to try and twist the paddles. But didn't want to try that. My question is. How are the forces when doing 3d to throw the paddles out of alignment?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-13-2005 02:05 AM  13 years agoPost 2
vaportrail OLD

rrApprentice

Anchorage, Alaska

My Posts: All  Forum  Topic

I've had the same problem and did have one slip. I had done a hard pullout of a dive and the thing just dove and rolled into the ground.

On inspection the paddle with the stripped screw was turned down 45. I had put ca in the screw hole which allowed me to tighten it a bit more but I didn't ca the flybar. That's all that was used on some MA birds so it should be good enough.


The real point of terrorism is not the act itself, but our reaction to the act.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-22-2006 05:34 PM  12 years agoPost 3
702nitro

rrKey Veteran

Las Vegas, NV

My Posts: All  Forum  Topic

Resurrect thread
I just bought me a set of the Rap30 blue paddles which came in yesterday and was able to install it last night. The problem is one of the set screws threaded in fine, but the other seemed to have stripped the thread. I tried rotating the paddles and it seems like it's on there pretty good and making a descent contact with the flybar, but i just can't get it out of my head that the threads are striped. I'm afraid that the paddles might rotate and misalight during flight. What do you guys recommend I do?

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 529 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Set screw problem with Greenies?
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Friday, November 16 - 8:23 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online