RunRyder RC
WATCH
 1 page 422 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › head spacers
10-10-2005 07:41 AM  12 years agoPost 1
Pre-Mix

rrApprentice

U.S.A.

My Posts: All  Forum  Topic

On the Predator head the manual calls for the spindle to be installed, then the rubber damper (black on for me) then a large dia spacer (shim) and three more smaller OD shims for each side. I found that I could only get the large OD shim and one smaller one to fit without binding. Is this what everyone else has experienced? Please let me know if this is the norm.

Thanks, Johan

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2005 12:18 AM  12 years agoPost 2
Ts8103

rrVeteran

Baltimore, Maryland

My Posts: All  Forum  Topic

The current Pred head should accept one large and two small without binding, the earlier version, the one I received when the Pgasser first came out will accept one large and three small shims. I personally put in as many as I can without binding for 3D.
Tone

Team Outrage
YS engines
Switchglo
Baltimore Boyz

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2005 04:01 AM  12 years agoPost 3
Pre-Mix

rrApprentice

U.S.A.

My Posts: All  Forum  Topic

Hi Tone,
Thanks for the info. Im currently running one large and one small shim. Will give that a go since I usually do only F3C and crashing...doh!
If the head develops some slop Ill add one more shim. Thanks.

Johan

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 422 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › head spacers
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, July 21 - 8:49 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online