RunRyder RC
WATCH
 1 page 1049 views POST REPLY
HomeAircraftHelicopter
e-
Electric Motors-Controllers-ESC
Other › CC governor mode
05-08-2005 10:46 PM  13 years agoPost 1
QuantumPSI

rrElite Veteran

Atlanta, GA

My Posts: All  Forum  Topic

Has anyone actually had good luck with the CC governor modes? I tried it on my Piccolo Pro and my new Shogun and didn't like what I got. Response is slow and I can hear the RPMs changing. My H2 with the MS controller and twister NEVER does this. You set it to your throttle setting and it stays there throughout the flight (until the battery gets low of course). If you have a CC25 and a Himax 4200 on a shogun and are using governor mode, and is working well, please let me know and describe to me your setup.

Mikel

...now where was I, dh/dt = BS-dx/dt
I will fly you forever... till earth do us part

PM  EMAIL  GALLERY  Attn:RR  Quote
05-13-2005 04:49 AM  13 years agoPost 2
HELILAB

rrApprentice

Sunny Miami Lakes, Florida 33016

My Posts: All  Forum  Topic

c.c. 25
the governor mode does not work well in any of my ehelis I use fix pitch mode and is been working good.

Mario

PM  EMAIL  GALLERY  Attn:RR  Quote
05-14-2005 04:51 AM  13 years agoPost 3
Rcbry

rrApprentice

USA

My Posts: All  Forum  Topic

I have not had any luck with gov mode either. Are you guys using a flat curve in fixed throttle mode or are you setting up curve like a glow machine?

PM  EMAIL  GALLERY  Attn:RR  Quote
05-18-2005 05:59 PM  13 years agoPost 4
hpilotrc

rrVeteran

NY--->>Mooresville, NC USA 8/2005

My Posts: All  Forum  Topic

CC 25 and Gov Mode WITH 1.13 Beta FW
Always have favored gov mode over fixed throttle mode.
Castles new 1.13 Beta works great....no more complaints....even the LED works properly now.

Michael

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-18-2005 07:05 PM  13 years agoPost 5
rckrzy1

rrElite Veteran

Hurst Texas

My Posts: All  Forum  Topic

so far works great with a align 2800SF motor, set it for 2200 and it holds, my throttle curve is like a flat 90%.

With a JGF 400DH it would not get passed 2000 rpm to save it's life.



Wildcat Fuels

PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2005 08:06 AM  13 years agoPost 6
tadawson

rrElite Veteran

Lewisville, TX

My Posts: All  Forum  Topic

I just set up my Shogun with a 400DH and CC25 with 1.14, and it seems to work fine in gov mode. Spoolup is a bit slow and erratic, but once it gets to speed, it appears to lock on no matter what I do with pitch, and speed changes coupled to flight mode are quick and lock right in. Using Gov-Hi with low endpoint at 115% and high at 100%, throttle value of about 65% gives good headspeed and just hits hi throttle on full collective. Oh, radio is a 10X . . . .

- Tim

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1049 views POST REPLY
HomeAircraftHelicopter
e-
Electric Motors-Controllers-ESC
Other › CC governor mode
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, July 17 - 3:25 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online