RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 787 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › CCPM Swashplate Anti-Rotation Guide
05-05-2005 09:32 PM  13 years agoPost 1
Xtreme Heli

rrApprentice

Houston, Texas

My Posts: All  Forum  Topic

How do you setup the Microheli CCPM swash plate with a anti-guide on the rear? I cannot make any sense of how to put something in to work.

Chris

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 10:02 PM  13 years agoPost 2
Charley Stephens

rrVeteran

Trussville, Al.

My Posts: All  Forum  Topic

which radio? if that is what you are refering to

ALeeS

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-05-2005 10:15 PM  13 years agoPost 3
Xtreme Heli

rrApprentice

Houston, Texas

My Posts: All  Forum  Topic

I am referring to the Frame setup on the helicopter. On the swash, there is a anti-rotation pin in the rear and I do not know of a way to implement this in with the stock setup of the frame. Wasn't sure if there is some other part out there that achieves this.

Chris

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 10:33 PM  13 years agoPost 4
derrickbwg

rrApprentice

Lexington, Kentucky

My Posts: All  Forum  Topic

There isn't one particular way to do it.....if you buy
Tpacks ccpm conversion it comes with an A/r guide(which is what I believe you're asking about). The stock frame is not setup for eccpm so if you did the mod yourself you'll need to fabricate an a/r guide. Do a search for ccpm conversions and you'll get lots of ideas on how to make one...everybody does it a little different. The last one I made came from a broken set of rchovers aluminum landing gear, a little dremelling and a few drilled holes is all it took.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-06-2005 03:36 AM  13 years agoPost 5
StrangeRanger

rrVeteran

VT

My Posts: All  Forum  Topic

Hey derrick,
I'd like to see that set up! I was utterly dissappointed w/ that landing gear set and would love to actually see a decent use for them
Xtreme Heli... an a/r guide is all up to you unless you bot a kit. Just cruise the other posts and galleries and you'll get tons of ideas. It's really not that complicated to make. Dang, mine is ugly but works. All I had was a little piece of alu screwed between the frames with a rib of plastic cut from a cd case sticking up. Notice I said had ... got a little over confident last time out and now have an upgrade opportunity at hand. W00t! Here comes Dave's frame in the mail LOL
j

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 787 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › CCPM Swashplate Anti-Rotation Guide
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, June 20 - 3:03 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online