RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 656 views POST REPLY
HomeAircraftHelicopterHIROBOOther › GY601 gain on freya
05-05-2005 06:37 PM  13 years agoPost 1
ofera

rrNovice

My Posts: All  Forum  Topic

hi

what is the gain set up when using the Futaba 601 on a freya90
on AVC mode +/ -

thanks

PM  EMAIL  Attn:RR  Quote
05-05-2005 08:16 PM  13 years agoPost 2
crazydave

rrNovice

Belleville IL USA

My Posts: All  Forum  Topic

I'm running 37% in normal 33% in idle up. Tail does not move at these settings. Viselike is an understatment.

Dave

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 08:31 PM  13 years agoPost 3
zagidave

rrApprentice

uk.(north london)

My Posts: All  Forum  Topic

check out jason krause site at jkheli.com.

he recommends never exceed 37%

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 08:56 PM  13 years agoPost 4
rob_jones

rrKey Veteran

Perry, GA

My Posts: All  Forum  Topic

Mine set to read 35% on the screen in both NORMAL and AVCS modes. It would be tough to make it let go!

Blade 550X, T-Rex 450 Pro FBL

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-05-2005 09:16 PM  13 years agoPost 5
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

36% in F3c mode.
Using 95mm CarbonTechs, works great.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-05-2005 10:54 PM  13 years agoPost 6
AndyH

rrKey Veteran

Rockledge, FL

My Posts: All  Forum  Topic

I've been happy with 28% (on 601 Screen) in 3D mode (it drifted like mad in F3C - ??). I run the 8.45 ratio with a 1750 Idle up and 680 SAB's w/ 95mm SAB tail blades.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 11:02 PM  13 years agoPost 7
slant911

rrVeteran

Las Vegas, NV. Hirobo, Magnum Fuels, MAH

My Posts: All  Forum  Topic

I'm running it at 35% in both normal and HH set to 3D mode. Solid like a rock.


John B. McNamara

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-06-2005 12:54 AM  13 years agoPost 8
ofera

rrNovice

My Posts: All  Forum  Topic

so 35% it will be

many thanks

PM  EMAIL  Attn:RR  Quote
05-06-2005 01:55 AM  13 years agoPost 9
Defiant

rrKey Veteran

usa

My Posts: All  Forum  Topic

I run 28%.........works well. The freya tail is very fast.....like 5 to 1 ratio.
Start at 26% and add until your comfortable.
What tail blade size are you using?....95mm are recomended, I use 95mm V-blade.

cheese

*

PM  EMAIL  Attn:RR  Quote
05-06-2005 02:35 AM  13 years agoPost 10
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

my x-spec was at 28% also. it never blew out either.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-06-2005 06:46 AM  13 years agoPost 11
ofera

rrNovice

My Posts: All  Forum  Topic

big cheese

I am using 95 tail blades.
i dont know y but i was under the impression that it need to be over 50% on both sides (huge mistake)

PM  EMAIL  Attn:RR  Quote
05-06-2005 09:52 AM  13 years agoPost 12
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

50%?

You should have the limits above 100%, on both sides.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-06-2005 02:21 PM  13 years agoPost 13
Defiant

rrKey Veteran

usa

My Posts: All  Forum  Topic

what is the gain set up when using the Futaba 601 on a freya90
i dont know y but i was under the impression that it need to be over 50% on both sides
------------------------------------------------------------------------------------------


Uhh..........are you talking about you limits now??
Because I was talking about the Gain......and I think everyone else was thinking gain aswell.......

I think this post was misunderstood!!!..........your talking about the A-B setting Right?...the movment of the tail servo right to left.

If so, then the limits do need to be between 110-120..
Also the servo horn should be around 18-19mm long.

cheese

*

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 656 views POST REPLY
HomeAircraftHelicopterHIROBOOther › GY601 gain on freya
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Monday, June 25 - 8:57 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online