RunRyder RC
WATCH
 1 page 421 views POST REPLY
05-05-2005 05:40 PM  13 years agoPost 1
B.Waitkus

rrVeteran

Massachusetts

My Posts: All  Forum  Topic

I replaced the gears on the servo last year, since then I just installed the servo on throttle control and notice when adjusting the atv the servo just stops moving at 109%. Anyone who is fimiliar with the gears, is it possible that the gear which regulates the movement, to 180 degrees, is not installed linear? I will check, but I'd like to see if their is another solution before I spend and hour or two fixing it.


thanks,

Brandon W

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 07:20 PM  13 years agoPost 2
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Is it hooked to a gyro that has a limit setting like the 401 or are you talking about directly connected to a reciever?

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 08:45 PM  13 years agoPost 3
B.Waitkus

rrVeteran

Massachusetts

My Posts: All  Forum  Topic

since then I just installed the servo on throttle control

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 11:40 PM  13 years agoPost 4
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Hehe

Oops sorry. My boss was walking back and forth like he was nervous and pacing. I replaced the gears on one of my spares a while back and dont remember any issue with getting full travel.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
05-06-2005 03:39 PM  13 years agoPost 5
B.Waitkus

rrVeteran

Massachusetts

My Posts: All  Forum  Topic

i guess i will have to take it apart and see what the deal was, thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
05-06-2005 03:47 PM  13 years agoPost 6
z11355

rrMaster

New England

My Posts: All  Forum  Topic

open it up. you'll find that you installed the big gear off by 1 spline or so.

you always want to check that after replacing gears, you get equal movement
when powered up

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 421 views POST REPLY
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, July 17 - 5:26 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online