My Posts: All Forum Topic
Hi just got my 601 gyro and set it up on the heli. I am using the gyro function on the radio for remote adjustment and i noticed that on the screen where it shows the actual gain i can only get 76% in normal with the gyro sensitivity set at 0 on the tx and 83% in AVCS with the gyro sensitivity set to 100 on the tx. By adjusting the gyro gain on the gyro from 100 to 120% in both modes i can acheive 100% actual in normal and 91% in AVCS. With the tx set into gyro mode you cannot change the endpoints for the gyro channel so i assume this is with 100% ATV either way on the gain channel. Now i realise it will fly with lower gain settings than this. But i would like to get the full range of adjustment out of it. Am i doing something wrong or is it a case of the JR pulse width's are different to that of futaba's and it just does not tie up? I was expecting to get actual gain of 100% for 90% ATV so something must be amiss please help.
This Heli Will Self Destruct In Five Seconds!!