RunRyder RC
WATCH
 1 page 1204 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityAvant › Querying Avant fliers
05-05-2005 12:47 AM  13 years agoPost 1
Ron Henry

rrApprentice

Atlanta area, GA - USA

My Posts: All  Forum  Topic

What blades are you guys running on your Avants? Augusto has told me that 680 - 690 is the limit but which 690s are you all using without problems. I know that pretty much every blade manufacturer measures their blades differently which is why an SAB 690 may be longer or shorter than a V-blade 690. I'm planning on running 690 V-blades on mine with 95 tail blades. Is anyone else using this exact configuration? I would just hate to get the machine together and then have a crash because the blades touched. I just want to make sure that when it's said that 680 -690s with 95 tails will work on an Avant without interference, that V-blades are included in that. Thanks..

- Ron Henry
http://kaizenrc.com/forum

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 01:08 AM  13 years agoPost 2
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

680-690's work. I had 690's on mine with 95mm tail and I had no problem. I also had 680's and 95's with stock dampers and didn't have a problem.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 03:25 AM  13 years agoPost 3
Ron Henry

rrApprentice

Atlanta area, GA - USA

My Posts: All  Forum  Topic

Which 690s?

- Ron Henry
http://kaizenrc.com/forum

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 03:39 AM  13 years agoPost 4
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

v-blade 690's. even if you get the 690 SAB's they won't touch. I don't think they are any longer than 695.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 04:27 AM  13 years agoPost 5
kym

rrApprentice

Provo Utah

My Posts: All  Forum  Topic

I running them on mine

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2005 01:51 PM  13 years agoPost 6
vetrider

rrElite Veteran

Daleville, AL (Ft.Rucker)

My Posts: All  Forum  Topic

690's and 97mm tail. No problem.

Nolan

PM  EMAIL  GALLERY  Attn:RR  Quote
05-06-2005 04:06 PM  13 years agoPost 7
4cyclic

rrKey Veteran

Montreal, Can. and northern Vermont

My Posts: All  Forum  Topic

I'm running v-690 and rotor tech 95 tail blades. Great combo, crisp response.

J.L.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1204 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityAvant › Querying Avant fliers
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, July 15 - 8:47 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online