RunRyder RC
WATCH
 1 page 451 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Futaba 9ZWC2 Radio Exponential question
05-03-2005 01:10 AM  13 years agoPost 1
buster1

rrKey Veteran

Manhattan, NY

My Posts: All  Forum  Topic

Hi, was hoping one of you 9Z experts could help me with a question related to exponential setting on this radio.
I am new to the radio and am having problems just setting exponential for the aerolon and elevator only,
it seems when I get into the exponential screen, when I set a value, it sets the values not only for aero. and elevator, but also throttle and rudder. How can I turn off throttle and rudder and only program exponential for aero. and elevator?

Thanks - any help would be extremely appreciated.
Jeff H. - NY

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2005 01:56 AM  13 years agoPost 2
rcheliflyer

rrKey Veteran

calif., usa

My Posts: All  Forum  Topic

No Expert but I do use expo and you can specify aileron, elevator,
and or rudder, this how I do it.
Go to AFR select control, near the top left press mode to EXPN1 and set" a or b" stick deflection to desired amount " - "softens response "+" quickens response around center stick.
Make sure to set in each mode that you want expo in.
If you are in the mode mentioned above there is no throttle choice,
and you set "a or b " to "0" for no expo.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2005 04:27 AM  13 years agoPost 3
marc8090

rrElite Veteran

Long Island, N.Y.

My Posts: All  Forum  Topic

Going through the AFR screen is the way to do it. In the initial AFR screen, pick the channel you want, then make sure to highlight the upper left item with the A key. Doing this will cause the channel choices to disappear, and NXT will appear on the bottom. Pick NXT and this will bring you to the exponential scren where you can set each channel and direction seperately. Just remember to do it for each flight condition.

PM  EMAIL  Attn:RR  Quote
05-03-2005 04:56 AM  13 years agoPost 4
buster1

rrKey Veteran

Manhattan, NY

My Posts: All  Forum  Topic

Thanks Guys
Thanks Guys, that did the trick,
Appreciate all your help,
JH

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2005 05:54 PM  13 years agoPost 5
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

As a general rule of thumb with a Z, it is always preferable to use the AFR menu for rates and expo adjustments UNLESS you have a specific need for multiple rates/expos WITHIN the same flight condition and to be toggled with a switch other than the flight condition switch.

Ben MInor

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 451 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Futaba 9ZWC2 Radio Exponential question
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, July 18 - 6:16 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online