My Posts: All Forum Topic
Out of curiosity, I would like to check what are good values to start with on CCPM setup with futaba radios. It looks like to start I get:
Swash type SR3
all swash values default to 50%
Now, if I set up the servos to give 0 pitch at exactly half stick and the swash is level and everything is 90 deg., the pushrods to the Bell mixer are just slightly shorter 6 or 7 mm) than in the manual.
There also seems to be some binding of the push pull arm for the rear "elevator " control on the canopy mount.
I did not check pitch range, but I would be limiting pitch to eliminate the binding.
So, if anyone would be kind enough to do a run down of their radio settings for a linear setup, I can refine the setup on my own. I just need to see if I am doing anything worng.
Thanks in advance!!!