RunRyder RC
WATCH
 1 page 921 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Bionic 24 Lith Setup
04-03-2005 01:38 AM  13 years agoPost 1
Neilius

rrNovice

Herts UK

My Posts: All  Forum  Topic

Hi All,

Just toying with the idea of going lith on my 24. I spoke with one of the guys at flight power uk about what to run and he suggested two 4s2p (5000mah) packs for 3D performance one the 24. I was initially happy to go with this but I did hear rumour that some people were flying two 5s2p packs with good results for aggressive 3D...can anyone shed some light on this? If im going to spend the money id like to get it right first time. Anyone here knows of/flying two 5s2p packs??

Any info gratefully received!

Best regards,

Neil

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
04-03-2005 03:15 AM  13 years agoPost 2
mudbogger2

rrKey Veteran

Hoschton,Ga.

My Posts: All  Forum  Topic

I have a stretched logo 14 running a tango 45-06 with 2 5s2p packs to make 10s2p total. Only made a few short test flighs due to high winds but so far seems pretty powerful.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2005 03:27 AM  13 years agoPost 3
rscamp

rrVeteran

Ontario, Canada

My Posts: All  Forum  Topic

I've never calculated a setup for a 24 but 8s2p and 5000mAh sounds a bit light to me. With the right motor, 10s2p or 10s3p sounds more like it.

Rob

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-03-2005 03:44 AM  13 years agoPost 4
THX1138

rrElite Veteran

Indianapolis, IN

My Posts: All  Forum  Topic

You could also see what the hot set-ups fpr the Logo 20 are. What ever is working for 3D on a 20 will be more than adequate for your Bionic.

What motor and ESC are you running?

Lou

Just give me five dudes and two flashbangs...

PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2005 05:20 AM  13 years agoPost 5
DaBman

rrApprentice

San Diego, Ca.

My Posts: All  Forum  Topic

I'm running 8S4P on my 20 with a Pletti 300/25/A3 with a 12T pinion and it ROCKS! I'm not doing 3D at the moment but I damn sure could with this setup. Good luck!

PM  EMAIL  Attn:RR  Quote
04-03-2005 01:53 PM  13 years agoPost 6
Neilius

rrNovice

Herts UK

My Posts: All  Forum  Topic

What motor esc are you running?
Im running the Pletti 300/30/A4 Motor that raplh suggested for higher cell counts/3D (slightly bigger than the A3) with a 12Tp and a Shutlz 32.40K Esc...

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
04-03-2005 02:06 PM  13 years agoPost 7
THX1138

rrElite Veteran

Indianapolis, IN

My Posts: All  Forum  Topic

In that case... A set of two 4s3p 6000 TP's should rock your boat just fine. Run them in series for 8s and you will probaly get in 10-12 min range of 3D flying.

Lou

Just give me five dudes and two flashbangs...

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2005 03:09 AM  13 years agoPost 8
Neilius

rrNovice

Herts UK

My Posts: All  Forum  Topic

Great! Thanks for your help everyone!

Neil

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
04-09-2005 12:43 PM  13 years agoPost 9
CustomPC

rrVeteran

Sydney, NSW - Australia

My Posts: All  Forum  Topic

Neilius,

With that motor the 10S2P would be better. 8S2P won't give you a high enough headspeed. The A4 is only 540rpm/v compared to 710rpm/v for the A3 or 800 for the tango.

It's best to run the slower A4 at a higher voltage. The benefit is that it'll draw less current, have more torque and longer duration.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 921 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Other › Bionic 24 Lith Setup
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Wednesday, July 18 - 5:50 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online