RunRyder RC
WATCH
 1 page 1197 views POST REPLY
04-02-2005 02:09 AM  13 years agoPost 1
esky

rrNovice

u.k

My Posts: All  Forum  Topic

Can any one help im haveing trouble getting my esky in the air ive charged the battery ive set the gain & proportion up as per manual yet when i move rpm stick to full i get a red light on the heli and the motor sounds as if it is under alot of load the swash plate moves to the bottom of it's travel the 3d switch is away from me as per manual if i move stick to less rpm green light comes on but not enough rpm for a flight any one got ant idea's

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
04-02-2005 03:34 PM  13 years agoPost 2
bell1684

rrApprentice

North Kingstown, RI USA

My Posts: All  Forum  Topic

Its normal for the red light to come on at full throttle.

When you are ready to fly, give the bird a bit of throttle, to get the blades rotating. Then set the throttle trim to between 1/2 and full, then apply more throttle. The bird should hover (depending on your battery) at between 1/2 & 3/4 throttle.

PM  EMAIL  Attn:RR  Quote
04-02-2005 09:18 PM  13 years agoPost 3
esky

rrNovice

u.k

My Posts: All  Forum  Topic

Hi
Found out what the problem was the two power plug's that go into the black box were in upside down so the main blade's and tail blade's were spinning backwards not clever and that's how it came from factory think some one was haveing a laugh in japan the bird now lifts of at half throttle

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 1197 views POST REPLY
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, July 20 - 12:01 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online