RunRyder RC
WATCH
 1 page 941 views POST REPLY
HomeAircraftHelicopterComputer Flight SimulatorsReflex › 3D -how with the reflex XTR
04-01-2005 08:49 AM  13 years agoPost 1
boomerang

rrApprentice

greece

My Posts: All  Forum  Topic

Hi,guy

I try to fly in 3D with the XTR,but that dont work.As soon as I am dot reverse,the heli does not have enough negative pich to go up.

With the CSM i dont have the problem,but the graphic are old fashion.

Can somebody help me .

Thank.

Nikos Katsoulis

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-01-2005 11:27 AM  13 years agoPost 2
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

You need to set your idle up 1 pitch curve in a V shape on your transmitter. You need to set up your transmitter just like you would your regular helicopter. So set up your pitch curve, throttle curve, throttle hold, etc. on your transmitter. After you get that done you will probably have to tweek your XTR Physical Parameters to get it to fly more realistically.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-01-2005 12:32 PM  13 years agoPost 3
boomerang

rrApprentice

greece

My Posts: All  Forum  Topic

Hi Saint,

I does it, like I does it with the CSM V.10,but with the Reflex i dont have the good result.

Nikos Katsoulis

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-01-2005 12:51 PM  13 years agoPost 4
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

As I said before you need to adjust everything on your transmitter's computer first, then work on the Physical Parameters on the XTR to get the helicopter to fly like you want. It's not like the CSM V.10, so you can't make your XTR the same because it won't work right.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-01-2005 02:47 PM  13 years agoPost 5
FBaity

rrApprentice

Tuscaloosa, AL

My Posts: All  Forum  Topic

Increase neg pitch in sim parameters after transmitter adjustments.

PM  EMAIL  Attn:RR  Quote
04-02-2005 09:27 AM  13 years agoPost 6
boomerang

rrApprentice

greece

My Posts: All  Forum  Topic

thanks to everybody

Nikos Katsoulis

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-02-2005 12:59 PM  13 years agoPost 7
boomerang

rrApprentice

greece

My Posts: All  Forum  Topic

I try to day with neg pich -14!!! dot work in reverse.

I dont see what i am doing wrong.

Nikos Katsoulis

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-02-2005 01:03 PM  13 years agoPost 8
boomerang

rrApprentice

greece

My Posts: All  Forum  Topic

i try today with -14 but ,dot work.

I dont see what i doing wrong.

Nikos Katsoulis

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-02-2005 01:20 PM  13 years agoPost 9
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

Did you make sure you calibrated the transmitter after you adjusted everything else? Make sure your throttle lever is all the way down before you start the calibration.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-03-2005 07:56 AM  13 years agoPost 10
boomerang

rrApprentice

greece

My Posts: All  Forum  Topic

Throttle always down before calibtration-yes.

Nikos Katsoulis

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-03-2005 03:57 PM  13 years agoPost 11
RCfan

rrKey Veteran

Longwood, FL USA

My Posts: All  Forum  Topic

Actually, NO! You're throttle should be mid-stick; the throttle curve should be linear 0-100%, so calibrate with stick at 50%.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2005 07:22 PM  13 years agoPost 12
Fredrik R

rrApprentice

Habo, Sweden

My Posts: All  Forum  Topic

RCfan is right. Always calibrate with ALL trims and sticks centered.


Fredrik

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 941 views POST REPLY
HomeAircraftHelicopterComputer Flight SimulatorsReflex › 3D -how with the reflex XTR
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, July 19 - 10:35 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online