RunRyder RC
WATCH
 1 page 495 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Hyper head touching frame
04-01-2005 01:48 AM  13 years agoPost 1
blade3d

rrElite Veteran

New Jersey USA

My Posts: All  Forum  Topic

Is the Hyper head supped to touch the frame,, Man that is one tight fit
I take it that is the way it is or will it melt the frame ? thanks for any info

Blade3d
Rupert

PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2005 02:23 AM  13 years agoPost 2
RobRoy

rrKey Veteran

Huntsville, Alabama

My Posts: All  Forum  Topic

MIne rubbed against the very front of my frames, on the top of the head, this ended up rubbing some of the blue color off the top of the head, but did not melt anything. After about 2 gallons of fuel, I removed the engine and filed the frames down a little to stop the rubbing, but I doubt you could slide much more than a sheet of paper thought there now. It's very close, but not quite touching.

Ignorance is curable, stupidity is for life.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2005 04:05 AM  13 years agoPost 3
blade3d

rrElite Veteran

New Jersey USA

My Posts: All  Forum  Topic

Thanks for the info, guess i'll do the same

Blade3d
Rupert

PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2005 08:03 AM  13 years agoPost 4
hepsibar

rrApprentice

Perth WA

My Posts: All  Forum  Topic

I had a similar problem with a c-spec and the 60 frames touching. This caused a lot of vibration in the radio crate area.

This is worth thinking about if you have the same problem. I moved the gyro which was not working well, from above the crate to behind the mast and my gyro gain went up and immediately performed much better. This was following a freinds advice. I have since put the 90 frames and crate on as I do not want to buzz my servo's to bits!

Empty Coffee Cup

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 495 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Hyper head touching frame
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, July 17 - 10:43 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online