Hi all !
I would like to know who has experience with the ERG-WRX servos(aka Airtronics 94758) on an eCCPM machine.
I'm using these servos on a mCCPM machine(Freya) and it flies flawlessly, I would like to know how would these servos perform on an eCCPM machine(such as Fury\Avant...).
The misgiving here is the current these servos consume - 3 to 3.5 amp average(5 x WRX servos, 10mins flight, 500-600mah chrage), peak is around 4-6 amp for each servo.
I would like to hear from those of you who are using\were using these servos on an eCCPM machine your experience and your setup(battery, regulator...) with the ERG-WRX(Airtronics 94758) servos.
Maayan Goren, Israel