My Posts: All Forum Topic
I just fitted a Concept 60 into a Graupner Bell 222. I'll put some pictures in my gallery in the next day or so. I had to make formers for the mechanics and I used a stainless tail drive from Vario, but if you get the height right there's no reason not to just slip the whole boom in. The pictures show my tail pushrod set-up too, quick release. The glow plug access is difficult, you had better fit a remote lead to it, and you will need a long starter shaft to go through a hole that you will make in the lower rear of the fuse to get to the start coupling. I just did a short bit of tail boom in the right place to lead the exhaust out from the lower rear of the fuse.
It flies great, just stripped it out to prepare for painting now.