RunRyder RC
WATCH
 3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ] 3275 views TOPIC CLOSED
HomeOff Topics › Aeroomni carbon tail boom
03-29-2005 01:01 AM  13 years agoPost 21
zoom boy

rrKey Veteran

N.E. Lincolnshire UK

My Posts: All  Forum  Topic

Repeating, is just badly looking - have some bubbles. But nothing wrong with the mechanical performance. They have same endurance as the booms with no bubbles.
Calling BS on that, the bubbles will be stress risers, if it breaks anywhere, it will be there.
I don't care if the blades or boom have one or two bubbles - I care if they are safe and if they work!!!!
Also calling BS on that, those bubbles are again areas that will concentrate the stress, they are NOT safe, you contradicted yourself there, if you cared, you wouldnt sell them.

Infact I'm calling BS on everything you have said, your reputation preceeds you

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 01:06 AM  13 years agoPost 22
SLiebl

rrApprentice

Lancaster, PA - USA

My Posts: All  Forum  Topic

All of his RR posts are defending his crapy product, have a look. Also, all of the topics get closed, what's up with that? How are people supposed to get warned of an inferior prouduct if the topics get closed?

I guess if it sounds too good to be true...

-Steve

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-29-2005 01:46 AM  13 years agoPost 23
CHamm

rrApprentice

Shellsburg, Iowa

My Posts: All  Forum  Topic

You know Paul, I didnt even get to break this low quality boow myself, it came broken. As far as being able to see through the resin, that would be fine, but I am looking through ACTUAL HOLES in your less than sub standard low quality parts. Holes meaning air can pass through them. I could thread a needle through all the holes and there would be string all over it.
As far as buying cheap stuff on ebay, i'll tell you I have bought a lot of very good quality stuff there at very good prices.
I see why sellers like you don't give feedback when you recieve the payment. When you sell parts as low quality as you do, you wait until the buyer leaves it for you. You use the fact that you don't leave feedback as leverage, so someone like me with 100% positive doesn't leave negative in fear of getting their 100% rating soiled with your negative feedback.
.
I am a customer. Here in AMERICA we have a saying. The customer is always right.
.
It may only be $20.50, but I want my money back. I am not pleased with you, or your product.
.
Also as far as your workers not keeping up on the quality, I don't care, that's your problem. You fix that however you need to, but don't give me any excuses, I don't need to hear it.



Instant Gratification is as good as it gets!!!

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 01:51 AM  13 years agoPost 24
da_man

rrKey Veteran

Central NC

My Posts: All  Forum  Topic

Or maybe just use the metal TT booms that cost 7.50 each That are perfect and fit correctly. Your product looks inferior to the cheaper metal boom and from what people say it is. Now would you rather pay 7.50 for a TT metal boom that works or 13$ for a boom that probably doesn't.

Anyway I really want to see a picture of you flying one of your "really nice" helicopters flying with a boom worse than you sell. Your words are as trusted as your products, you should see that if you haven't already.

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 02:09 AM  13 years agoPost 25
wolfdad

rrKey Veteran

Southern Maryland

My Posts: All  Forum  Topic

You know, we have another saying here in America...."what goes 'round, comes 'round." Keep that in mind, schmuck.

wolfdad sends....

"There are those who have...and, those who will" IRCHA #2117, AMA #70068, Turbine Waiver #105

PM  EMAIL  HOMEPAGE  Attn:RR
03-29-2005 02:48 AM  13 years agoPost 26
CHamm

rrApprentice

Shellsburg, Iowa

My Posts: All  Forum  Topic

Well, he wants me to send it back for $2.00 then he says he'll send my money back after I send pos feedback.



Instant Gratification is as good as it gets!!!

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 02:57 AM  13 years agoPost 27
cforcht

rrKey Veteran

Chelsea in BFE Iowa

My Posts: All  Forum  Topic

Aeroomni i also bought one of these booms and it hasnt arrived yet. if it is of the same quality as my friends who started this thread im going to want my money back. if you choose not to refund it i will most definitely post negative feedback on your ebay account. But i will keep it and fly it if you give me a 100% money back guarantee on this boom that it will not fail in flight. meaning if it breaks in flight and causes a crash you pay for all of my repair costs due to a crappy quality boom. nowhere in the ebay ad did it say anything about pinholes and 2 half construction or any defect whatsoever. so in my opinion thats deceptive advertising. and i will be more than happy to have ebay investigate your trading policies. and do whatever i can to get you kicked off of every board and forum i find you trying to peddle inferior grade parts. ive seen the boom you sent my friend and i would say it isnt worht a pinch of crap and not even suitable to use as a paint stir stick.



[b]heli flyer by day, custom making cnc heli parts by night[/b]

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-29-2005 03:00 AM  13 years agoPost 28
cforcht

rrKey Veteran

Chelsea in BFE Iowa

My Posts: All  Forum  Topic

Aeroomni No i dont think mark will shut this thread down because its a good topic to warn people not to buy the crap you are peddling on ebay. and give you a chance to show your ignorance.



[b]heli flyer by day, custom making cnc heli parts by night[/b]

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-29-2005 03:04 AM  13 years agoPost 29
Leif

rrElite Veteran

USA

My Posts: All  Forum  Topic

I fly dailly 2 tanks with R30 or R50 and 2 Lipoles with Maxir and Rambo heli. I need at least 2 booms a week, 2 sets of blades
2 push roads to tail rotor 2 sests of tail rotor blades.
Sounds like you can't fly for **** either. You get two boom-strike crashes a week flying just two tanks a day?

Your "cheap replacement" argument just doesn't make sense. There is NO NEED to put carbon-fiber tail booms and blades on a heli to make it fly well, so all those students should just stick with the stock aluminum tail booms and safe wooden rotor blades from the manufacturer. Do all your flying buddies also crash twice a week? If your crap LOOKED good, you could claim to be satisfying the "bling-factor" for those who want their helis to look like hot stuff. Otherwise, you can't compare it to the $60 CF booms and blades made by the PROFESSIONAL outfits.. who know how to make parts that FIT, LOOK GOOD, and ARE SAFE.. and who also know how to package their parts so that they reach the customer UNDAMAGED.

As far as packaging being expensive, for the money you're charging you can easily afford some protective packaging. Maybe your supplier can switch from trying to make heli parts to making some cheap packing tubes. Once they've perfected that they can move on to more challenging parts...

Your real concern should be business and personal liability. You're selling obviously defective parts that are used in a dangerous piece of machinery. WHEN someone gets hurt due to a failure of YOUR DEFECTIVE PRODUCT, you are going to learn an important business lesson. In the meantime, it's obvious that you are too greedy and stupid to even see the liability, both to the well-being of your customers and to your own; both in business and personally.

Leif

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 03:21 AM  13 years agoPost 30
OnFiRe705

rrApprentice

Southbury CT

My Posts: All  Forum  Topic

for somebody saying that they dont want to put there business at risk....u sure made a fool of urself time after time after time. The reason why parts in america arent cheap is because there high quality and wont pose a risk to whomever uses there product. As said before.... Why would you need to buy mutliple tail booms in a week. I think u need to up ur flights on each helo u fly to 4 times each. You also need to concetrate on flying and give up on ur crappy business. Im sure theres something u could be good at.....making CF parts isnt one of em. I dont like bashing people, but when they rip off multiple people and mislead them i tend to get very angry. U just be glad that you are not in the US, cuz that sh!t wont fly here. You would end up a bum on the side of the street cuz somebody got hurt due to ur crap. Think about it.....if you spend the extra 2 bucks to ship something that would have less of a chance to break and have a happy customer then its worth it cuz they will go back to you. Otherwise you will continue to have this problem and im sure you will eventually get tired of listening to all of this. Oh and by the way.....saying anything on this forum isnt talking behind ur back....its a warning to others not to buy ur crap.

It takes a high school education to fix em but a college degree to break em

PM  EMAIL  Attn:RR
03-29-2005 03:26 AM  13 years agoPost 31
3d type

rrVeteran

Bridgeport,CT USA

My Posts: All  Forum  Topic

Aeroomni , paul ? who ever you are, i thought you were going to sleep ? you even lied about that! you just keep digging your grave deeper and deeper!

how'd the ground come up like that ?

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 03:39 AM  13 years agoPost 32
OnFiRe705

rrApprentice

Southbury CT

My Posts: All  Forum  Topic

last 3 words im gonna say about him.....What a douche

It takes a high school education to fix em but a college degree to break em

PM  EMAIL  Attn:RR
03-29-2005 05:30 AM  13 years agoPost 33
Rogue123

rrKey Veteran

Phoenix AZ

My Posts: All  Forum  Topic

What an A$$. Just give him back his cash, false advertsment. Complain to EBAY he will get banned.

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 05:57 AM  13 years agoPost 34
rcelectricc

rrNovice

Orange County, CA

My Posts: All  Forum  Topic

Item location is in Santa Barbara, US ??? what the heck? I wonder why ebay haven't banned this guy yet . It's obvious that he's trying to rip off people.


Tim

PM  EMAIL  Attn:RR
03-29-2005 07:20 AM  13 years agoPost 35
reefguy

rrApprentice

palmdale california

My Posts: All  Forum  Topic

i bought a set of these so-called cf blades, so badly bubbled, couldn't get them to balance, to return them would cost more than what the baldes are worth, i waited almost 3 months to get the blades, wait another 3 months back for 15 bucks, of course the shipping amount was ridiculous, i wanted to leave feedback, but since the item took so long to arrive, the feedback time to post was gone, so there are lot of un=happey buyers, who wanted to post there feedbacks or just too pissed off and don't care no more, why are people on ebay buying them, its like anyone other person looking for a good deal on a ' what should be a satisfactory item ' , but for the honest ebay sellers, at least they try to describe them in details, of what the buyer will get. then of course how many of them are repeated buyers?, a model helicopter is a precision machine, where every part has to be perfect even down to having your motor tuned correctly, and these blades are not acceptable to be on a such machine, now i'm sure there are a few flyers who don't care how their r/c helis are, even if it shaked like a baby's rattle as long as they can get it to lift off the ground, and think that as acomplisment in itself. now having that said, its one of those things in life, where you make a silly mistake and move on.

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 07:30 AM  13 years agoPost 36
Crusty

rrApprentice

N51 degrees 29.823 minutes W3 degrees 16.133 minut

My Posts: All  Forum  Topic

FFS, why the hell hasnt mark banned this idiot yet?

I am dsylexia of borg..resistance is fruity...your arse will be laminated

PM  EMAIL  Attn:RR
03-29-2005 07:57 AM  13 years agoPost 37
Sp00ky

rrApprentice

CHRISTCHRUCH, NZ

My Posts: All  Forum  Topic

Why ban him from here when having him continually screw up and make himself look bad as achieving what most of us want anyway.. his business to fail.

Personally, Id prefer he stuck around as a constant reminder of stupidity and where not to buy from.

Ive just alerted a number of guys I fly with of this guy and I can bet you anything, within a few weeks, this guy wont get a single dollar from this side of the ditch. Ive also requested that a number of people operating heli sites post warnings to unsuspecting customers. I suggest everybody here does the same.

If you can think of one way, or one person you can discourage from buying with this guy, DO IT.

Whats he going to do, sue for loss of biz.. bwaahaha.. yeah right.

PM  EMAIL  Attn:RR
03-29-2005 08:10 AM  13 years agoPost 38
westwindpilot

rrVeteran

Glendale, AZ

My Posts: All  Forum  Topic

i say we dont ban him. if we ban him all the new people who want to try out this hobby wont know about what hes doing and will fall for his advertisement. keep him here and keep talking about his stuff. atleast the people that come here will know about it and not buy his stuff. its a start.
steve

PM  EMAIL  GALLERY  Attn:RR
03-29-2005 09:28 AM  13 years agoPost 39
Al Magaloff

rrMaster

12,199 Posts- Enough Time Wasted. See Ya!

My Posts: All  Forum  Topic

After reading this aeroomni guy's " litterature", I don't feel sorry for anyone who purchased from him! He's laughing at you!

PM  EMAIL  Attn:RR
03-29-2005 09:30 AM  13 years agoPost 40
CHamm

rrApprentice

Shellsburg, Iowa

My Posts: All  Forum  Topic

Paul, checked my paypal this morning and no money yet. Whats the hold up? You said you would send money back? I wouldn't post links to your website on my topic if I were you either.



Instant Gratification is as good as it gets!!!

PM  EMAIL  GALLERY  Attn:RR
WATCH
 3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ] 3275 views TOPIC CLOSED
HomeOff Topics › Aeroomni carbon tail boom
 Print TOPIC  Make Suggestion 

 13  Topic Subscribe

Tuesday, July 17 - 11:06 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online