RunRyder RC
WATCH
 1 page 563 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › 8U/9C not overcamming thr servo with ail/ele to thr mixes
07-16-2002 01:43 PM  16 years agoPost 1
AMCross

rrApprentice

champaign IL

My Posts: All  Forum  Topic

Q: How do I keep from overdriving my throttle servo when using an elevator-to-throttle or aileron-to-throttle mix?

A: The easiest approach is to run a governor instead of the mixes you describe. However, if you chose not to run a governor, then you can:

1. unplug your throttle servo horn
2. push the ATV of the Throttle up to the max value (+140)
3. push the subtrim of the ATV at the limit (opening the carb, sign
depending on your helicopter/engine combo)
4. replace the servo horn using the full throttle position as
reference (the center position has been shifted !)
5. modify your low ATV to match the carb travel (closed position)

Now you can activate 2 PMIX (one for ELEV->THRO and one for AILE->THRO)without binding anything. (With thanks to Emmanuel and other members of the futabaowners email list at http://www.groups.yahoo.com.)

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 563 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › 8U/9C not overcamming thr servo with ail/ele to thr mixes
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Friday, July 20 - 5:56 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online