RunRyder RC
WATCH
 1 page 619 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › raptor pitch gauge ?
07-15-2002 01:28 PM  16 years agoPost 1
sebastianforbes

rrApprentice

the wallops, hampshire, england

My Posts: All  Forum  Topic

hi there,

can anyone give me the idiots way of using my thunder tiger pitch gauge ?

how do i tell whether i have -2 to 11 degrees pitch or -1 to 12 degrees pitch etc. where is 0 degrees pitch ?

many thanks.

sebastian

PM  EMAIL  Attn:RR  Quote
07-15-2002 05:17 PM  16 years agoPost 2
Gbouten

rrApprentice

Alamogordo, New Mexico

My Posts: All  Forum  Topic

If you are talking about the marks on the side of the fuse. You do not use them to set up your pitch. You use them to get your linkage adjusted from the servo to the head. It is a basic starting point. If you will go to http://www.raptortechnique.com/ he walks you through it step by step. Once you have the basic setup, you will then use a blade pitch gauge to do the final adjustments using the long rods that are on each side. I have followed this setup on 3 raptors and it works perfectly.

Greg

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 619 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › raptor pitch gauge ?
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Sunday, July 22 - 11:42 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online