RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 585 views POST REPLY
12-10-2004 12:30 AM  13 years agoPost 1
svenaslav

rrNovice

Kalamazoo, MI

My Posts: All  Forum  Topic

Hey guys
It's Christmas (up grade time). Is there any reason not to use a Phoenix 35 and Park 400. I have noticed that the vendors mentioned most often here don't offer them and none sell a combo with the 35. Several of you are using the Park and 25 with BEC. Why not the 35 for $16 more.
Thanks for the input.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2004 12:56 AM  13 years agoPost 2
copperclad

rrElite Veteran

NY

My Posts: All  Forum  Topic

hi
the cc p-25 bec is only good to 1.5 amps the cc p-35 is good to 3 amps
i'm running a p-25 but if i had it to do all over again , and $16.00 , i'de go with the p-35

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2004 01:17 AM  13 years agoPost 3
BlakeMcBrayer

rrElite Veteran

Georgetown, Ky

My Posts: All  Forum  Topic

That is the exact combo I have ordered for my second Shogun. I have the 25 and bec on my first one and I might change it to the P-35. The Park 400 is KILLER. It's alot better than the high dollar motors!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Don't come off the throttle untill you see your GOD!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2004 01:22 AM  13 years agoPost 4
Kirt

rrApprentice

Lexington KY

My Posts: All  Forum  Topic

The only bad thing that I saw about the 35 is that is bigger of course and I went with the 25.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2004 01:46 AM  13 years agoPost 5
svenaslav

rrNovice

Kalamazoo, MI

My Posts: All  Forum  Topic

Blake
Where did you get them from.

Does anyone know what type of o-ring is in the main rotor blade hub. My stock foamys tracked fine for about 30 flights and now not so good and one blade is looser and sticky. Is this the o-ring, lube or bearing?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2004 01:19 PM  13 years agoPost 6
CRAZYKEV

rrVeteran

Cincinnati,Oh - U.S.A.

My Posts: All  Forum  Topic

The Park400 is a great motor! I have the CC-25, but if I did it over again I would get the CC-35 just for the better BEC. One good thing about my setup with the SBEC is that the servos are seeing 6v and are much faster!

Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2004 07:52 PM  13 years agoPost 7
Chads

rrNovice

Depew, NY USA

My Posts: All  Forum  Topic

I am setting up my heli with a Park 400 and a cc-35. Do you guys think I should be ok without a SBEC or should I put one on to be safe?

Thanks... Chads

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2004 07:58 PM  13 years agoPost 8
CRAZYKEV

rrVeteran

Cincinnati,Oh - U.S.A.

My Posts: All  Forum  Topic

You should be O.K. with the CC-35, the only cool part by adding one is that the servos could be seeing higher volts if you got a 6v SBEC. Otherwise, don't even worry about it Chads!

Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
12-11-2004 01:31 AM  13 years agoPost 9
BlakeMcBrayer

rrElite Veteran

Georgetown, Ky

My Posts: All  Forum  Topic

svenaslav,

I ordered both from a local discount LHS. He had Park 400's on the shelf and ordered the 35 for me. I hear the park 400's are back ordered everywhere?

Don't come off the throttle untill you see your GOD!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-11-2004 02:48 AM  13 years agoPost 10
Mike Wilson

rrVeteran

Toronto, Canada

My Posts: All  Forum  Topic

I am currently using the Park 400 and CC-25. I am running 3 HS-56 servos and an HS-50 on the tail. I am having no issues so far with the BEC on the CC-25 but I will probably disable the onboard BEC and install an SBEC just to be on the safe side.

The Park 400 rocks though with a 9 tooth pinion and 2400-2800 headspeed.

,,,,,led

Teambob00

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 585 views POST REPLY
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, June 19 - 7:58 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online