RunRyder RC
WATCH
 1 page 417 views POST REPLY
HomeAircraftHelicopterComputer Flight SimulatorsOther › controler problems
12-07-2004 11:28 PM  13 years agoPost 1
Falloutboy

rrNovice

mishawaka,indiana usa

My Posts: All  Forum  Topic

i have the real flight sim and i was flying to day on it and i was fliping it forward and then i wen to pull back and the stick stayed kind of forward but moved to center after i helped it then i went to do a backflip and it didnt move it stayed at center and i opened it up and i cant tell what the problem was has any one had the problem and what did you do to fix it.
thanks for the help.

Dreams of being a Quik UK pilot.

PM  EMAIL  Attn:RR  Quote
12-08-2004 02:16 AM  13 years agoPost 2
rcheliace

rrVeteran

Freehold, N.J. United States

My Posts: All  Forum  Topic

billnye

Whe you open the controler look at the back of the pod. move the stick up and down while looking at the back of the pod. you will see a little( I mean litte) pin that looks like it goes straight threw from the stick. there is a divit in the plastic. The pin might have worked it's way into that divit. If so, just put the stick all the way to the top or bottom and use a small flathead screwdriver to push it back in.

I had to do it to mine. It had me quite puzzled for a while.

Rob
rcheliace.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-08-2004 02:42 AM  13 years agoPost 3
Falloutboy

rrNovice

mishawaka,indiana usa

My Posts: All  Forum  Topic

i dont think thats it its still in the middle looks just like the other one
in the same spot

Dreams of being a Quik UK pilot.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 417 views POST REPLY
HomeAircraftHelicopterComputer Flight SimulatorsOther › controler problems
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, July 23 - 6:18 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online