RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 368 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › 401 and tail blades on a R30 V1
11-04-2004 01:40 PM  13 years agoPost 1
blockatvalpo

rrKey Veteran

Reston, VA

My Posts: All  Forum  Topic

I have a raptor 30 and I want to make sure I have the tail right, because I have had it set up two different ways, and they both work. Should the tail blades be straight when centered, or should they be off center with the leading edge facing the tail boom. This way they are off setting the main rotors. I have heard I can do it both way, but I want to know what the best way is. Currently I have it so that they are off center. IMO this is the better way because if I were to take it off HH the tail won't move as much as if they were straight. Do I have the right thinking. I have the tail pitch slider at 90 degrees like raptor technique. I did this when I first got the heli over 2 years ago. I have only been to one funfly/open house, and I have seen them set up both ways there as well. Any advice would be appreciated. I hate to think I have been doing it wrong all along, but better to ask.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 368 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › 401 and tail blades on a R30 V1
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, June 22 - 4:27 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online