RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 472 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › What throttle servo for GV-1
11-03-2004 09:32 PM  13 years agoPost 1
helibird

rrKey Veteran

St. George, UT

My Posts: All  Forum  Topic

What throttle servo would be best for a GV-1 running an OS50 on a Raptor 50v2

PM  EMAIL  GALLERY  Attn:RR  Quote
11-03-2004 09:47 PM  13 years agoPost 2
frankg11

rrVeteran

Bellevue, WA

My Posts: All  Forum  Topic

Since there is no load on the servo for the throttle to speak of any servo would likely work. I have an analog servo on my 50 that came with my radio, and it works great. You just want to make sure that it has a reasonable transit time.

PM  EMAIL  Attn:RR  Quote
11-03-2004 10:14 PM  13 years agoPost 3
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

Best is hard to tell..
but I´ve been using 9001 and lately 9253 without any problems.
Cant say that I notice any difference between the 2 servos.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-03-2004 10:16 PM  13 years agoPost 4
Drunk Monk

rrProfessor

Preston, UK

My Posts: All  Forum  Topic

I use a DS811 on mine, works well, no probs here


Stephen

I only open my mouth to change feet.....

PM  EMAIL  GALLERY  Attn:RR  Quote
11-03-2004 10:30 PM  13 years agoPost 5
GBNT

rrApprentice

uk

My Posts: All  Forum  Topic

Super servos or fast digitals, may be a bit over the top for the GV1 (although I use one on mine because I had one spare)

Some other comments Here

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-03-2004 10:36 PM  13 years agoPost 6
pcliftonjr

rrKey Veteran

Phoenix, AZ

My Posts: All  Forum  Topic

I use a 9001 and it's working for me. I've also been told that digitals are overkill.

Paul

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-04-2004 12:48 AM  13 years agoPost 7
daren

rrVeteran

Hampshire Sponsored by Quick UK

My Posts: All  Forum  Topic

i've just replaced my futaba 148 that i've been using on throttle for nearly three years, It was the only part of my raptor that i've never replaced.

I only replaced it incase it gave up from old age

Daren
Using the ground to reverse engineer

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-04-2004 04:07 AM  13 years agoPost 8
helibird

rrKey Veteran

St. George, UT

My Posts: All  Forum  Topic

So for the GV-1 it doesn't need a fast servo? I'm running a JR 537 right now (without the GV-1) should I replace it or leave it?

PM  EMAIL  GALLERY  Attn:RR  Quote
11-04-2004 09:08 AM  13 years agoPost 9
cjw

rrVeteran

UK - Cheshire

My Posts: All  Forum  Topic

I'm using a standard JR 591 on my Raptor 50 and it seems to hold the headspeed pretty well. On the Fury I've got a fast Digital, and to be honest, I can't tell the difference in throttle response between the two.

I'd stick with the standard servo for the throttle.

Clive

http://www.cjwoods.com

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-04-2004 09:10 AM  13 years agoPost 10
cjw

rrVeteran

UK - Cheshire

My Posts: All  Forum  Topic

Meant to add that I've tried the digital in the Raptor, and couldn't tell the difference

Clive

http://www.cjwoods.com

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 472 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › What throttle servo for GV-1
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, June 19 - 3:06 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online