RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 626 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › GY 401 + JR Radio
11-02-2004 05:51 PM  13 years agoPost 1
rzanasi

rrApprentice

Belo Horizonte,MG-Brazil

My Posts: All  Forum  Topic

Can I do a ``mix` using futaba gy 401 + 9253 + JR 8103 in a Raptor 30 V2 ,,,I had a CSM 540 and stoped to work,I don`t know why with 2 months using that,so i passed for g5000t + 8417, and 2 days ago I crashed my Raptor 2 times because I lost my tail,why don`t know if was the gyro or the servo,but the servo works fine,so I think that can be the gyro,,,,I`m so irritaded with that I was thinking to stop to flight,,I`m going try the last chance and I looking for gy 401, or Robbe g 400 or Ikarus profi,,,what`s the best choice

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 06:59 PM  13 years agoPost 2
angelob

rrKey Veteran

Stoughton WI

My Posts: All  Forum  Topic

Yes, the 401/9253 works just fine with JR radios. I use only 401s and I use a 10x.

Angelo

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 07:52 PM  13 years agoPost 3
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

From the 3 you´re choosing between I suggest you get yourself a GY401.

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-02-2004 09:09 PM  13 years agoPost 4
rzanasi

rrApprentice

Belo Horizonte,MG-Brazil

My Posts: All  Forum  Topic

g5000t + 9253
it`s possible to use that

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 09:11 PM  13 years agoPost 5
rzanasi

rrApprentice

Belo Horizonte,MG-Brazil

My Posts: All  Forum  Topic

Thanks,,
Do you know something about Robbe gyro(G 400)????

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 09:17 PM  13 years agoPost 6
tadawson

rrElite Veteran

Lewisville, TX

My Posts: All  Forum  Topic

All work fine. No need for mixes either - just use the gyro function on the 8103 like it was designed.

- Tim

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 09:21 PM  13 years agoPost 7
rzanasi

rrApprentice

Belo Horizonte,MG-Brazil

My Posts: All  Forum  Topic

Tim,
What`s the gyro that are you talking???Thanks for colaborate

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 09:27 PM  13 years agoPost 8
blockatvalpo

rrKey Veteran

Reston, VA

My Posts: All  Forum  Topic

Get the 401/9253 or 9254. Great combo and very easy to set up in the 8103. YOu can have it under the gear switch or rudder dual rates.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 11:39 PM  13 years agoPost 9
rzanasi

rrApprentice

Belo Horizonte,MG-Brazil

My Posts: All  Forum  Topic

Ok, But I Have a question,,I had a CSM 540 and it have a travel ajust for left and right separates, does 401 have this ajust??I`m asking this because I have a 5000t and is so dificult to ajust the travel ajust(just have one pot for the both sides and we have to do that mechanic)

PM  EMAIL  GALLERY  Attn:RR  Quote
11-03-2004 07:37 AM  13 years agoPost 10
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

With the 401 you adjusts travel with one pot.

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-04-2004 09:14 AM  13 years agoPost 11
cjw

rrVeteran

UK - Cheshire

My Posts: All  Forum  Topic

Ok, But I Have a question,,I had a CSM 540 and it have a travel ajust for left and right separates, does 401 have this ajust??I`m asking this because I have a 5000t and is so dificult to ajust the travel ajust(just have one pot for the both sides and we have to do that mechanic)
The 401 has only one directional travel adjustment, that is both left and right are altered at the same time, you can't set left to be different than right. It's not hard to set up though mechanically.

The GY601 has seperate left / right parameters if this is what you're looking for. Hell the 601 has adjustable parameters for just about everything

Clive

http://www.cjwoods.com

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-04-2004 09:57 AM  13 years agoPost 12
rzanasi

rrApprentice

Belo Horizonte,MG-Brazil

My Posts: All  Forum  Topic

Thank's,,I'm asking this because a have a 5000t and it have just one pot to ajust the travel,and it's so dificult to ajust because I lose the "center",and when I use in Normal mode the heli tend to the right,so I need to put in Heading Mode,but the tail drift,so I put 1 or 2 trim clicks to correct this,,,,
Has anyone trayed to use 5000t + 9253???I'm going to try to use this weekend

PM  EMAIL  GALLERY  Attn:RR  Quote
11-04-2004 10:16 AM  13 years agoPost 13
cjw

rrVeteran

UK - Cheshire

My Posts: All  Forum  Topic

Not familiar with the 5000t, but with most gyros, if you apply any trim on the radio, they lose their centre and drift. You need to ensure that there is no trim, sub-trim etc in your radio with the Futaba gyros. I'm guessing it's the same with the 5000t, but I could be wrong.

Clive

http://www.cjwoods.com

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-04-2004 01:28 PM  13 years agoPost 14
rzanasi

rrApprentice

Belo Horizonte,MG-Brazil

My Posts: All  Forum  Topic

''''''''''when I use in Normal mode the heli tend to the right''''''''''


this is because your not centering the servo properly BEFORE you connect the gyro...

go HERE and click on gyro setup basics.......

basically once you trim the heli MECHANICALLY in normal mode once u flip to hh it should take little or no trim at all........

Ok you are correct,but if I DO like you , my heli is going to slow turn to the right, so I need put more left than right to the stay ok with MECHANICALLY ajust, so I lost the center,,,Everybody understood me??I'm asking this because I'm from Brazil and English is so dificult!!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 626 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › GY 401 + JR Radio
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, June 23 - 9:00 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online