RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 568 views POST REPLY
HomeAircraftHelicopterRobbe Cuatro - Millennium - Nova - Dyna-X › Millie 2 15tooth pinion shims
11-01-2004 09:45 AM  13 years agoPost 1
Tom Retzinger

rrNovice

Lincolnshire, IL

My Posts: All  Forum  Topic

I am installing a 15 tooth pinion on my millie 2. How thick of shims should I install between the stock motor mount and the motor?

PM  EMAIL  Attn:RR  Quote
11-01-2004 03:35 PM  13 years agoPost 2
Kjetil

rrApprentice

Oslo, Norway

My Posts: All  Forum  Topic

Hi Tom,

I use two 0.8mm shims on each side on mine.
Works fine.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2004 03:00 PM  13 years agoPost 3
Dr.J

rrVeteran

Ontario, Canada

My Posts: All  Forum  Topic

I think the theoretical difference between the stock and 15T pinion is .7mm. I think the shims I received from Alex are from 1 mm stock; but, because the shim is curved, it results in a thickness of 1.2mm.

I think anywhere between 0.7 and 1.2 mm is probably fine.

John

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 568 views POST REPLY
HomeAircraftHelicopterRobbe Cuatro - Millennium - Nova - Dyna-X › Millie 2 15tooth pinion shims
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, June 18 - 6:14 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online