RunRyder RC
WATCH
 1 page 442 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Different link lengths after metal upgrade?
06-02-2004 10:24 PM  14 years agoPost 1
widowmaker

rrNovice

Slemmestad, Norway

My Posts: All  Forum  Topic

I've upgraded my raptor 30v2 with a metal head from quickworld. when I installed it, I used the link lenghts showed in the raptor manual. The links from the seesaw control arm and down to the swash are said to be 105mm. After I put the metal head on, there is no way that I can use 105mm. I must at least make them 10mm shorter. Is this ok? anyone had to use different link lengths after upgrade?

GET A LIFE, GET A RAPTOR!

PM  EMAIL  Attn:RR  Quote
06-03-2004 07:57 PM  14 years agoPost 2
RaptorPraetor

rrApprentice

Carlsbad, New Mexico

My Posts: All  Forum  Topic

You use the length that you need. The book gives you a starting point and you go from there. Just remember 90 degrees on all links.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-05-2004 10:30 AM  14 years agoPost 3
andyp

rrApprentice

New Zealand

My Posts: All  Forum  Topic

The QuickUK head uses the same geometry as the standard head, so no link changes are necessary. Thats a very nice feature of the QuickUK stuff. Plug and play.

My gallery has been updated.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 442 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Different link lengths after metal upgrade?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, July 22 - 8:17 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online