My Posts: All Forum Topic
Sand the white gearThere have been tons of posts on this subject. Check the search function for different threads.
The bottom line is the white gear is slightly small for the auto hub. Don't know why they can't fix it at the factory but either way, it's too small. I would rather sand the gear than remove metal from the hub. If you ever need to replace the gear and they fit correctly at that point, then it would be too loose on the hub. There are a few different ways to do it. I used a socket with some 80 grit emery paper wrapped around and pushed it in the hole of the white gear and turned the gear around the socket. It should move freely over the auto hub but not have any side play. Also, don't tighten the lower jesus bolt too much. It will distort the white gear. You may have to get a slightly longer bolt because on mine, the bolt stopped before the nylock portion of the nut.