im useing a futaba 601 gyro in my r 90 std, and same on a r50 v2 a m8's.
ive got my limitt set to 125% for both A and B to lenghen the servo life
i could get more limitt for A but the max without binding for B is 125%
so i keep them both the same 125%
my ball link on the servo can only go on the center hole wich is only 11mm from center of servo
is this correct?
as ive seen people useing ball links 15 and even 17 mm from center
of there servo?
what is your limitt set to , and ball link from center in mm