RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 1278 views
HelicopterHIROBOOther › NHP cooling shroud and frame stiffener...
04-26-2002 06:46 PM  15 years agoPost 1
Henrik Engert

rrKey Veteran

Cedar Park, TX

My Posts: All  Forum  Topic

Hi.

I bought a NHP cooling shroud and frame stiffener for my Sceaud 50.

It came with one set of M3 screws. The drawing stated they should be 10mm long. Mine were about 40mm long. Looked just like a muffler screw. Not threaded all the way. These 10mm screws were supposed be on the frame, but they are way too long. Something is not correct.


Anybody had any experience with this part for the Sceadu?

Thanks.

PM  EMAIL  Attn:RR  Quote
04-26-2002 07:00 PM  15 years agoPost 2
Henrik Engert

rrKey Veteran

Cedar Park, TX

My Posts: All  Forum  Topic

PM  EMAIL  Attn:RR  Quote
04-26-2002 10:03 PM  15 years agoPost 3
heliraptor

rrKey Veteran

Colchester, Essex, UK

My Posts: All  Forum  Topic

Screws

Hinke

The screws are to replace the ones that bolt through the frame to hold the skids on as the brace increases the width of this area and the stock screws don't meet it.

The smaller bolts are for the mid section of the brace.

Lee

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
04-26-2002 10:17 PM  15 years agoPost 4
Henrik Engert

rrKey Veteran

Cedar Park, TX

My Posts: All  Forum  Topic

Hi

There is no way these screws that I got with the package will fit anywhere on the Sceadu.

Check these images:

http://hem.spray.se/hnengert/cooling.htm

The screw is only threaded say around 10mm down, just like a muffler screw if you know what I mean.

40mm are too long to even fit throught the frame and the skids. + I only got one set of these 40mm ones. I should have gotten 2 sets if they are supposed to replace the stock screws for the skids.

-Hinke

PM  EMAIL  Attn:RR  Quote
04-27-2002 08:38 PM  15 years agoPost 5
Shagga

rrApprentice

Wiltshire, UK

My Posts: All  Forum  Topic

Looks like the instructions and the product were put into the market in haste:

I am not surprised that you have problems assembling this item.

The picture of the cooling shroud is the wrong way up in relation to the bottom stiffener! The 'tongue' part of the shroud should be pointing up and slots into the plastic frames of the Sceadu.

The quality of the parts is ****. They do not fit together - I had to rework the width of the slots (by about 2mm) in the stiffener to accomodate the shroud.

The space for the remote glow adapter is severely restricted also.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-28-2002 12:04 PM  15 years agoPost 6
Richard

rrVeteran

Scottish Borders, U.K.

My Posts: All  Forum  Topic

I had similar problems with the one I bought for my Raptor 30. I had to file down parts to get it to fit. In the end I left off the shroud.
Richard

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1278 views
HelicopterHIROBOOther › NHP cooling shroud and frame stiffener...
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, December 11 - 7:03 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online