RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 101 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBeastX › Ar7200 setting help
04-29-2018 08:52 PM  28 days agoPost 1
Metalwizard

rrNewbie

hurricane Utah

My Posts: All  Forum  Topic

Ok this is the second AR7200 for me... the first one in my 300x is ROCK SOLID.. perfect..

the second one is in my KDS 450 (trex clone) and I just set it all up ..

tail is rock solid... response is great but hovering it around its kind of sloppy and wanders around a lot... drifts a bit mostly left and rearward.

I notice when holding the heli... and I twist it the tail responds FAST and hard... as the gyro should ... but the swash plate... it only responds like 25% of what my 300x does.. meaning if I tip it the swash moves the right direction... but it does not seem like its enough..

Now im not SUPER DUPER with these things... I follow the instructions best I can setting it up beyond that im pretty clueless..

so heres what I KNOW..

setting ... POTS all three are dead center...

in my radio the GYRO settings are at about 50%

what suggestions can I get... where do I start looking or what settings do I need to adjust (and why would be nice LOL)

thanks in advance!

PM  EMAIL  Attn:RR  Quote
04-30-2018 10:59 PM  27 days agoPost 2
Metalwizard

rrNewbie

hurricane Utah

My Posts: All  Forum  Topic

WOW I cant believe no one has any suggestions even bad ones.. usually I get so many im confused.

PM  EMAIL  Attn:RR  Quote
05-03-2018 11:47 AM  24 days agoPost 3
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Did you adjust the step J (teaching the cyclic pitch geometry) to 6 degrees using aileron with the blades in line with the heli (front to back) REGARDLESS of what colour light you got?

Are both helis set the same in Parameter B (control behaviour)?

Are you using the same expo or any expo in both models?

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-26-2018 05:17 PM  1 day agoPost 4
Metalwizard

rrNewbie

hurricane Utah

My Posts: All  Forum  Topic

Boy it had been so long I forgot I asked about this here.

YES 6Deg for sure...

the setting on my 450 are HIGHER (like they are set to EXPERT)

it does not fly bad.. it just seem slow to react... it wanders a bit and is spongy

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 101 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBeastX › Ar7200 setting help
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, May 28 - 12:44 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online