RunRyder RC
 3  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 330 views POST REPLY
05-01-2018 12:50 AM  20 days agoPost 21
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

Refer to this manual that I found for use by using Google..... looks like the “clone” frames in your picture.....

https://www.rcworld.co.za/downloads/trex450.pdf

scroll down to the frames where they show the servos being installed then look at reference item #51. They even give you a part #. They call it a “plastic nut”.

In your browser’s URL window , type in google.com and then search for that part number.....you’ll need a total of 6 according to the manual

Hint: if you have some extra servo horns laying around, you can cut some up and make your own backers for “free”

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 12:58 AM  20 days agoPost 22
UKhelinoob

rrVeteran

Michigan USA

My Posts: All  Forum  Topic

Heli Fanatix
Perfect example of:

If you don’t ask, they don’t tell... but how do you ask if you didn’t know what to ask? Well, consider this a lesson and now We are sure you will ask about Servo mounting hardware next time you buy a frame.

But to answer you question
- the servos Do Not mount directly into the CF frame
- if this is new from a clone vendor, it’s typical when it’s not BNF
- if it’s from a forum member, politely ask the seller (and leave out the jokes)
Scott I know that the servos don't screw straight in to the frames. I was just asking where I can get them from that's all, and for you reference I did ask, so your wrong (I ain't stupid or a novice either).. The sellers just no they don't come with the frames (Only one set did), and they did come from a clone vendor.... Nothing wrong with that...

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 01:07 AM  20 days agoPost 23
UKhelinoob

rrVeteran

Michigan USA

My Posts: All  Forum  Topic

JuanRodriguez
Refer to this manual that I found for use by using Google..... looks like the “clone” frames in your picture.....

https://www.rcworld.co.za/downloads/trex450.pdf

scroll down to the frames where they show the servos being installed then look at reference item #51. They even give you a part #. They call it a “plastic nut”.

In your browser’s URL window , type in google.com and then search for that part number.....you’ll need a total of 6 according to the manual

Hint: if you have some extra servo horns laying around, you can cut some up and make your own backers for “free”
Thanks.. No hard feelings eh???

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 01:20 AM  20 days agoPost 24
UKhelinoob

rrVeteran

Michigan USA

My Posts: All  Forum  Topic

Nothing shows up on Google, eBay ect.. With the part number HB2016CF.. Which your right.. It's correct part that I need. If you type in that number or Align in front of it, still nothing at all.. Just lot's of crap..

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 01:29 AM  20 days agoPost 25
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

Just make up your own with a spare or two servo horns it’s not a high tech thing .....

And no hard feelings here ! I have thick skin....

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 01:30 AM  20 days agoPost 26
UKhelinoob

rrVeteran

Michigan USA

My Posts: All  Forum  Topic

JuanRodriguez
UKhelinoob
Does the servo just screw in to the carbon fiber holes.
Sure does sound like you’re asking if the servos screw into the CF frames to me !!

What am I (and Scott) missing???
Nope... I was asking where I can get the servo mount kits, as it was just a comment.. That's all (I ain't stupid to screw servos straight into the frames)...

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 01:31 AM  20 days agoPost 27
UKhelinoob

rrVeteran

Michigan USA

My Posts: All  Forum  Topic

JuanRodriguez
Just make up your own with a spare or two servo horns .....
Ok thanks...

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 03:54 AM  20 days agoPost 28
UKhelinoob

rrVeteran

Michigan USA

My Posts: All  Forum  Topic

Oh Problem solved.. I canceled the order and bought this one.. Which has the servo rubber nuts already fitted (It's a Tarot Carbon Fiber Main Frame Set), so it'll go in to my scale fuselage (That I bought) with a nice 4 blade rotor head,Torque tube drive..You know all the best (Darn another self queen)... Oh, what motor will be needed to drive this head guys (Nice comments please)... You see I like good advice..

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 04:59 AM  20 days agoPost 29
Heli Fanatix

rrVeteran

Fountain Valley, CA

My Posts: All  Forum  Topic

Looks like you need more than help with your air frame ... you need to learn common courtesy and forum etiquette when looking for help

so quick to correct, comment and point out in a very abrasive way. do consider giving up the need to right for the time being until you have the acquired the skills.

we understand you are not stupid or a novice, but it's hard to think else wise from types of questions/responses and the way you have been conducting

may I suggest thinking: "Right Attitude" b/4 we can choose the "Right Motor"

OK .. good luck

- Scott

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2018 01:54 PM  20 days agoPost 30
UKhelinoob

rrVeteran

Michigan USA

My Posts: All  Forum  Topic

Heli Fanatix
Looks like you need more than help with your air frame ... you need to learn common courtesy and forum etiquette when looking for help

so quick to correct, comment and point out in a very abrasive way. do consider giving up the need to right for the time being until you have the acquired the skills.

we understand you are not stupid or a novice, but it's hard to think else wise from types of questions/responses and the way you have been conducting

may I suggest thinking: "Right Attitude" b/4 we can choose the "Right Motor"

OK .. good luck
No Another negative comment from Scott.. All I ask is what right motor..That's all.. I have a common courtesy and forum etiquette here. If you don't think that I have then please don't reply...

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 330 views POST REPLY
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, May 21 - 10:23 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online