RunRyder RC
 6  Topic Subscribe
WATCH
 1 page 162 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBrain iKon › Ikon2 and BK servos
02-09-2018 02:14 PM  8 days agoPost 1
Raptor xp

rrNovice

New Bloomfield, Mo

My Posts: All  Forum  Topic

I’m getting ready to buy the electronics for a new goblin black nitro and was wondering if anyone has run into issues with Ikon2 hd and 7000 series BK servos. Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2018 04:29 PM  8 days agoPost 2
Flyin for Jesus

rrVeteran

Dana Point, Ca. 92629

My Posts: All  Forum  Topic

No personal experience, but perhaps no news is good news???
I've never heard that combination being a problem.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2018 04:54 PM  8 days agoPost 3
rcflyerheli

rrKey Veteran

Granbury, TX USA

My Posts: All  Forum  Topic

Not to hijack the thread, but a couple years ago (or so), I did a lot of testing with the BK servos on all series Vbar units that were available at the time (Neo wasn't available). I found I could shut all the Vbars down with only one servo (7001). As a comparison, I compared that result with an Ikon1. Putting all the servos into the Ikon did not cause it to shut down like the Vbars.

Hope this helps.

Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep

PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2018 06:19 PM  8 days agoPost 4
Raptor xp

rrNovice

New Bloomfield, Mo

My Posts: All  Forum  Topic

The reason i even bring it up is I watched a video with Bert in it and he made mention of it. He did not specify if it was version 1 or 2

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2018 12:55 AM  7 days agoPost 5
Eury

rrProfessor

Dover NH

My Posts: All  Forum  Topic

I’ve got BK7001s with an Ikon2 on my N5c. Nothing weird to report, they work fine.

Nick Crego

Citizen #0168

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2018 01:23 AM  7 days agoPost 6
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

Raptor xp
I’m getting ready to buy the electronics for a new goblin black nitro and was wondering if anyone has run into issues with Ikon2 hd and 7000 series BK servos. Thanks
In an early version of the 2.0.??? code for the iKON and Brain, there was a problem with the BK Servo DS-7002HV.
All other BK Servo servos were fine. It was weird, because we were flying the BK Servo DS-7001HV with no problems
Working with BK Servo tech guys, MSH SW Dev made some changes in the MSH code and corrected the issue in their next release

The latest release of MSH code is 3.1.027 (corrected). So this issue was a long time ago.

I currently use these BK Servo servos:
2 - DS-7005HV (tail) (T600E / T600N)
3 - BLS-8002HV (swash) (T600E)
1 - DS-5005HV (tail) (G380)
3 - DS-3001HV swash (G380)

These are all on Brain 2.

The recommendation from MSH is to run the refresh rate NO HIGHER than 200Hz for the DS-700X swash servos.
But, you can run the DS-7006HV at the full rated 760us/333hz

BTW: I run the Align BLS-815H and BLS-855H on my Goblin 700 Black Nitro with an Align DS535M Full Metal HV for throttle.
Brain 2 HV/BT and I use 200Hz refresh on all of them

Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2018 01:55 AM  7 days agoPost 7
Dawiev

rrApprentice

Middle East

My Posts: All  Forum  Topic

4 airfrsames - 550x, Rush 750, CHP 600n, Goblin gasser. No problem.

Ps. Latest code is 3.1.027 I believe.

PM  EMAIL  Attn:RR  Quote
02-10-2018 02:06 AM  7 days agoPost 8
Raptor xp

rrNovice

New Bloomfield, Mo

My Posts: All  Forum  Topic

Thank you guys. It makes sense. I really wanted to try the Bk servos so I over researched them. I like the ikon to much to learn a different one.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-13-2018 01:31 PM  4 days agoPost 9
old nitroman

rrVeteran

Naples florida

My Posts: All  Forum  Topic

I run the ikon in 14 helis most of them run the bk servo line, all with no problems, just make you set them up right. On servo page find servo and click it. that's how easy

E5s and E7se,and a 766, Roban bell 222 800 superscale,450 bell 4 bladed head,gobby 380and 420 ,180cfx

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 162 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBrain iKon › Ikon2 and BK servos
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Saturday, February 17 - 11:37 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online