Waikawa Beach New Zealand
My Posts: All Forum Topic
Can you please put me in the picture when setting up the BD 3sx?
I have set up a compass Pod and Boom to test before fitting into a large scale Vario.
From the start I found it easy to set up using the wizard.
On the mixer page I had the collective travel and the Aileron/Elevator set at + - 9 Degrees with centre stick at 0 Now is when the problem starts.
To get 5 degrees at centre stick I used the Collective offset set to 80 gave me the 5 degrees Centre 13 top and 3 bottom Basically scale setting.
However when I checked the Elevator and aileron I had +6 minus 12.
So my understanding is that the Collective offset did not effect the other settings. Whats wrong?? Cheers Colin