RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 141 views POST REPLY
HelicopterBeginners Corner › Trex 470 tail shake
02-02-2018 08:32 PM  80 days agoPost 1
bigSi66

rrNewbie

Shrewsbury Shropshire UK

My Posts: All  Forum  Topic

Ok got a 470 with a micro beast
on heading hold the tail hunts but off its fine
dose not matter how much I turn the gain down it still dose it
anyone know why ?
or am I missing something
Thanks
Si

PM  EMAIL  Attn:RR  Quote
02-02-2018 08:44 PM  80 days agoPost 2
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

Hunting
I have to ask this... Is there any bind at all in the tail pushrod or slider?? In HH the gyro is constantly trying to move the blades.. even a slight bind will show up.. in normal mode the gyro is not working near as hard, so that might mask the problem...

Stan

AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft

PM  EMAIL  GALLERY  Attn:RR  Quote
02-02-2018 08:50 PM  80 days agoPost 3
bigSi66

rrNewbie

Shrewsbury Shropshire UK

My Posts: All  Forum  Topic

No its as free as can be
in fact its brand new
had 4 flights and as long as heading hold is off its fine
Just when its on it seems to hunt

PM  EMAIL  Attn:RR  Quote
02-02-2018 08:59 PM  80 days agoPost 4
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

Servo Frequancy/Pulse
Is the beast set properly for your tail servo?? Also, did you do a manual setup in the rate mode so no drift during hover??
It has been awhile since I used a BX

AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft

PM  EMAIL  GALLERY  Attn:RR  Quote
02-02-2018 09:07 PM  80 days agoPost 5
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

Are you sure you're adjusting the gain on the right channel ??

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
02-02-2018 09:09 PM  80 days agoPost 6
bigSi66

rrNewbie

Shrewsbury Shropshire UK

My Posts: All  Forum  Topic

Also, did you do a manual setup in the rate mode so no drift during hover??
Not to sure what you mean here ?
I did the one side of the set up sheet you get with the beast x
for the servo rate and everything else

PM  EMAIL  Attn:RR  Quote
02-02-2018 09:23 PM  80 days agoPost 7
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

Rate Mode Setup
While in rate mode, put heli in a hover.. let go of the rudder and see if the heli nose turns one way or the other.. if it doesn't stay straight make adjustment to your linkage until it will stay straight.. after that setup, then try your heading hold setting...
I just noticed the other post.. make sure your seeing the LED's changing color as you adjust your gain in either direction..

Stan

AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 141 views POST REPLY
HelicopterBeginners Corner › Trex 470 tail shake
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, April 24 - 9:33 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online