What main shaft should be used with a FL head setup on the 600N?

The literature states to use HN6118 main shaft when upgrading a 600N.

Part HN6118 has been discontinued so what number replaced it?

https://www.alignrccdn.com/parts/t-...aft-hn6118.html

spending time, paying attention

600 N Which version pro, le, or dfc

spending time, paying attention

600 Nitro Pro its was flybarred converted to flybarless

Mines an le I just swapped the grips and hub and used a separate swash follower . I would just keep using your current main shafts. The links from the swash to the grips can be measured .

spending time, paying attention

HN6118 Grand RC and LowerHeli are showing them in stock.

Blades; what goes around, comes around!

I sure wish Align sold a total replacement package of Ball link just to replace those on the Swashplate H60H004XX

http://shop.align.com.tw/product_in...roducts_id=5324

●Linkage ball B(M3x3) x 5(Φ4.7x9.7mm)
●Linkage ball B(M3x4) x 2(Φ5x12mm)
●Φ5 Linkage ball D(M3x3.5) x 2(Φ5x9.3mm)
●Long linkage ball(M3x3) × 1(Φ4.7x24.5mm)
●Φ5 Long linkage ball(M3x4) × 1(Φ5x29mm)

Align put 4.7 and 5mm size ball links with various lengths as noted above on the swashplate