RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 493 views POST REPLY
HelicopterMain Discussion › What best esc with bec
01-07-2018 09:55 PM  4 months agoPost 1
007

rrApprentice

WHEELING WV

My Posts: All  Forum  Topic

Is the talon 120 safe to use with built in bec or what other options

PM  EMAIL  GALLERY  Attn:RR  Quote
01-07-2018 10:33 PM  4 months agoPost 2
Doublah

rrKey Veteran

USA

My Posts: All  Forum  Topic

The built in BEC on the ESC is 20 amp peak and 10 amp continuous which is plenty. Input is 3s to 12s. Selectable voltage for servos is 6-8 volts.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-08-2018 11:37 AM  4 months agoPost 3
dialarotor

rrElite Veteran

Traverse City, Michigan

My Posts: All  Forum  Topic

Talon 120
Standing next to Nick Maxwell one day and asked him the same question while he was smacking a 700 pretty hard. He says to me, that's what is in there right now. That's all I had to hear. For me, I like simple and so the Talon 90 and Talon 120 is what I use and will stay with.

RapRexSynLog Pilot

PM  EMAIL  GALLERY  Attn:RR  Quote
01-08-2018 11:52 AM  4 months agoPost 4
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Does it have dual BEC outputs to the RX/FBL?

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-08-2018 12:16 PM  4 months agoPost 5
Dan Minick

rrKey Veteran

Columbus, WI

My Posts: All  Forum  Topic

The safe choice has always been Kontronik. Buy red and never wonder again.

Team Synergy, Team FBL Rotors-------if its not broke...it will be!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-08-2018 03:23 PM  4 months agoPost 6
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

I would use the Talon 120 but I would set the BEC to 6v if you are running HV servos and bench test for any brown outs first.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-09-2018 02:18 PM  4 months agoPost 7
coolice

rrKey Veteran

Northamptonshire, England

My Posts: All  Forum  Topic

Richardmid1
Does it have dual BEC outputs to the RX/FBL?
Hey buddy.

Yes, the Talon 120 has dual BEC power wires to the flight gear. Via the usual power/signal lead and a seperate power only plug in additional lead.
It's basically a BEC PRO with an ESC attached. I've not used one but seen one. Also I think you can select the output voltage via the castle programming lead so can set higher than 6 volts for HV use, which would all help with the current draw by the servos.

The Talon 90 doesn't though sadly.

Ian Contessa

Ian Contessa
Team Robbe SchluterUK
Midland Helicopters

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 493 views POST REPLY
HelicopterMain Discussion › What best esc with bec
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, May 28 - 12:25 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online