Sterling Heights, MI - USA
My Posts: All Forum Topic
Your weren't in the setup menu. This quote from the manual describes how to get into the setup menu. It will not flash if you are in setup.
The programming of the MICROBEAST works in the following way: There are two menu levels. From ready mode (flight mode) you can always get into the one or the other menu level. A change between the menu levels is not possible; you always have to first get out of the current level to enter in the other menu level. Each level includes several setup points. The yellow LEDs next to the letters shows at which setup point you are currently. Note that the two menu levels have a different number of setup points.
• To access the Setup menu you keep the button pressed (several seconds)until LEDA stops flashing and lights up continuously. In this menu all the basic settings are made to adjust the MICROBEAST to your helicopter.
• To access the Parameter menu, press and hold the button briefly until the LED A starts to flash quickly and immediately release the button. This menu is used to fine tune the flight characteristics and is mostly neededat the airfield.