RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 74 views
HelicopterClassifieds - ElectronicsRegulator-Switch › Scott Gray Reactor X2
12-07-2017 04:16 AM  6 days agoPost 1
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Scott Gray Products (SGp) Reactor X2

CCPM Power Bus - Three heavy current connections for CCPM / Mech. Mix servos on a dedicated power bus for direct, consistent regulated power straight from the battery pack at up to 15A peak.
A toggle switch sets this power bus to 6.0V or 6.8V output or use the included jumper for unregulated 8.4V

Receiver Power Bus - A dedicated noise-free linear regulator provides preset 5.2V power through three redundant leads to your receiver which provides over 5 Amps of current. This voltage is recommended to get the best out of every gyro and tail rotor servo. The steady power supply will eliminate any chance of receiver brown-outs. Signal output from the RX to the CCPM servo bus are carried through the included large gauge connection leads. The receiver is at safe voltage for any 4.8V rated equipment plugged in.

Features:

“Never-shut-down” circuitry ensures constant power delivery in any possible condition with system always reverting to power ON
Exclusive Voltage Bus selectable output setting, no setup required
Quick-charge cable, direct power to servos, redundant RX power, and fail-safe-on logic switch
Use on/off switch harness of any type, or power on with removable pin-switch jumper included
Triple redundant receiver power and direct current to CCPM Servo Bus

Specifications:

Input Voltage Supply: 7.2-8.4V
Output 1(CCPM/3Servo BUS): 6.0V, 6.8V or 8.4V (unregulated) selectable; 15A+
Output 2(RX, Gyro, Tail Rotor): 5.2V; 5.0A
On/Off Failsafe: Reactor failsafe to ON if switch failure
Compatibility: JR, Spektrum, Futaba, Hitec, etc.
Battery types supported: Li-Poly, Li-Ion, Ni-MH, Ni-Cad
Fast charge capable: Included fast charge cable
Weight: 56.5g
Batt/Charge connector: Deans ultra plug style
Use Case: 3 Swash Servos on Flybarless gyro or Flybar Equipped

The Reactor X2 for sale has been used in several electric and nitro helicopters with 100% reliability
I am changing to a gyro that has a built-in LiPo battery connection.

Includes three M-to-M servo connections, 2 jumpers (one for on/off, one for voltage selection).

Asking $30 USD (PayPal) shipped to NA.

Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 74 views
HelicopterClassifieds - ElectronicsRegulator-Switch › Scott Gray Reactor X2
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention buyers! For sellers to Add Classified Feedback you need to Post Reply in the seller’s topic thus creating the green feedback link.
Stating price is not mandatory but recommended. Complaining about price or complaining about pre-sale negotiations is inappropriate and against policy.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Wednesday, December 13 - 11:25 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online