RunRyder RC
 3  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 660 views
HelicopterMain Discussion › Microbeastplus
12-05-2017 03:47 PM  6 days agoPost 21
Heli_Splatter

rrElite Veteran

USA

My Posts: All  Forum  Topic

Do you have a copy of the MicroBeast instructions? They are very clear about the setup steps. I know that I had to have a microBeast Plus replaced one time when it would not reset correctly.

Follow instructions, then call Horizon for help.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-05-2017 04:20 PM  6 days agoPost 22
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

joshmoha
Do you mean have the rec. plugged in before I set the beast to futaba?
Yes...but you must bind to Tx 1st before connecting to FBL

* * * * *

When LEDs H - N do not quit running

Check whether the receiver sends out control signals and that all cables are properly connected to the MICROBEAST/MICROBEAST PLUS. In particular make sure the plugs are inserted with correct polarity and not offset to the pin connectors of the MICROBEAST.

http://wiki.beastx.com/index.php/Help:FAQ:Powerup/en

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR  Quote
12-05-2017 06:14 PM  6 days agoPost 23
joshmoha

rrApprentice

midland texas

My Posts: All  Forum  Topic

Ok I will try that when I get off work

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2017 02:39 AM  5 days agoPost 24
joshmoha

rrApprentice

midland texas

My Posts: All  Forum  Topic

Beast

Ok I borrowed a friends futaba rec.and it seems to be working fine. I don't know what was the problem but so far so good. Thanks for all the help guys

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2017 04:30 AM  5 days agoPost 25
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

Ok I borrowed a friends futaba rec.and it seems to be working fine.
No offense intended...but "OK" what?

How exactly did you solve your issue?

Your post implies that your Futaba receiver was broken....and that your friend's Futaba receiver is not broken and works correctly....And that your beast was working....and the manual helped you....

And which type Futaba receiver is yours...and which type Futaba receiver is your friend's?

We all like to hear exactly what/how the issue was solved.....so that we don't have the same issues.....or know how to correct them....

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2017 03:01 PM  4 days agoPost 26
Heli_Splatter

rrElite Veteran

USA

My Posts: All  Forum  Topic

I am good. Hope it helped.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2017 03:56 PM  4 days agoPost 27
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

I am good.
?

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2017 04:08 PM  4 days agoPost 28
jester4

rrKey Veteran

Brampton, Ontario

My Posts: All  Forum  Topic

EEngineer
?
I thought the same thing

PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2017 04:24 PM  4 days agoPost 29
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

I hope the OP takes the time to post what the solution to the problem was for everyone's benefit....

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2017 02:43 AM  2 days agoPost 30
joshmoha

rrApprentice

midland texas

My Posts: All  Forum  Topic

Sorry. But I don't know what the problem was for sure I replaced my futaba 6202sb I took off a heli I was flying and sit in a drawer for two years put in a new heli beast would not link to the rec. lights just scroll up and down borrowed a new 6206 beast worked first try.thanks again.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2017 05:44 AM  2 days agoPost 31
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

Sometimes that happens....thanks for the feedback anyway...

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 660 views
HelicopterMain Discussion › Microbeastplus
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, December 12 - 10:34 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online