RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 125 views
HelicopterRadio - Spektrum DSM › JR 783 Battery
11-10-2017 09:09 PM  36 days agoPost 1
870heli

rrVeteran

Monson Ma. USA

My Posts: All  Forum  Topic

I picked up a New 783 just for fun. I need a battery for it. Can you use a lypo or life in these old radios? Just wondering before I buy something like an old NiCad. Yuk LOL

PM  EMAIL  GALLERY  Attn:RR  Quote
11-10-2017 11:18 PM  36 days agoPost 2
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

What is the voltage that was used on that radio?

Knowing that, you could perhaps select another type of battery.

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  Attn:RR  Quote
11-11-2017 01:28 AM  36 days agoPost 3
870heli

rrVeteran

Monson Ma. USA

My Posts: All  Forum  Topic

It was a 4x4x AAA NiCad setup. I think they called it 9volts. A three cell lypo would be 11.1 volt. Hobby King has battery's that size I just don't know if that's too high a voltage.
I found a older battery from a DX-7 but the plug was different than the JR. I wasn't expecting that.
I didn't get the battery with the radio so I am not sure of the connector.
I hope it works when I find a battery. It was suppose to be new unused.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-11-2017 02:19 AM  36 days agoPost 4
R/C Speed Nut

rrVeteran

Galesburg, Michigan USA

My Posts: All  Forum  Topic

http://www.hangtimes.com/txpacks.html
You will need to choose the JR Black T connector.

If you decide to go with a lithium battery, with a three cell lipo the voltage is a little too high and can overheat the regulator in the transmitter, unless you add a resistor in line to reduce the voltage. You could go with a three cell li-fe, it has a lower voltage (9.9v) and would be good for your application.
Which ever lithium you choose you would need to locate an old style JR Black T connector and solder it on.


Mike

Funky Chicken?!!..........I thought this was how you do a piro flip!!

PM  EMAIL  GALLERY  Attn:RR  Quote
11-11-2017 04:40 AM  36 days agoPost 5
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

Not sure what 4x4x means....except NiCad and you mention 9V.

An "D", "C", "A", "AA", "AAA" alkaline battery's voltage is 1.5V per cell.

So, if you mean 8....then 8 x 1.5V = 12V nominal

A NiCad cell is 1.2V....

So, 8 x 1.2V = 9.6V nominal.

Within your TX's internal power distribution circuitry, is a "regulator"....which "buffers" the TX circuitry from the variance of the battery voltage during its discharge from usage.....

Keep the plug of your TX's original battery pack.....you will need that to use as an adapter plug for the new battery pack that you're going to use on this TX....as you will simply cut of the plug of the new battery pack and solder on the plug of the original battery pack....to make it plug and play(or is that plug and pray.....LOL).

You could use another 8 cell NiCad pack...and use the original TX connector plug......if it fits in your TX, that would be best....

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  Attn:RR  Quote
11-11-2017 12:12 PM  36 days agoPost 6
870heli

rrVeteran

Monson Ma. USA

My Posts: All  Forum  Topic

Thanks and yes I did mean 8 cell NiCad pack. So 9.6 would be what was in it. That is what I think as the TX did not have a battery in it. I guess I will be looking for that black JR connector.
It sounds like a life three call would work without a regulator.
I just wanted to have it be old school but can use current equ. if this becomes to involved.
Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
11-15-2017 03:53 PM  31 days agoPost 7
870heli

rrVeteran

Monson Ma. USA

My Posts: All  Forum  Topic

Battery's America had what I needed in stock so I am all set.
Just hope the radio works. LOL

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 125 views
HelicopterRadio - Spektrum DSM › JR 783 Battery
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Sunday, December 17 - 1:36 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online