RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 164 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Spektrum DSM › Older Version Spektrum DX7
10-08-2017 12:31 AM  13 days agoPost 1
mgfiest

rrNovice

Leamington Ontario Canada

My Posts: All  Forum  Topic

Does anyone have any idea what this DX7 could emulated. I have a Nano CPS and the manual does not cover that DX7.

I try to bind but it does not keep. I sure the settings are different.

thanks

PM  EMAIL  Attn:RR  Quote
10-08-2017 01:08 AM  13 days agoPost 2
gmcullan

rrKey Veteran

Southbridge, MA

My Posts: All  Forum  Topic

The original DX7 was DSM, I believe, and thus would not be compatible with the newer DSM2 and DSMX receivers.

Gerry Cullan,
Gaui 200, 255; T-Rex 250, 450 SE & SA, Mini-Titan, Blade 450

PM  EMAIL  GALLERY  Attn:RR  Quote
10-08-2017 02:57 AM  12 days agoPost 3
mgfiest

rrNovice

Leamington Ontario Canada

My Posts: All  Forum  Topic

the manual states it's dsm2

PM  EMAIL  Attn:RR  Quote
10-09-2017 12:50 AM  12 days agoPost 4
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

My Posts: All  Forum  Topic

Ya, the good old dsm2 dx7 will work fine. I still have mine as a backup for my dx18 g1 and also use it as a trainer slave.

Just set up a heli model and follow the dx9 settings best you can for throttle/pitch curves. Your panic button will probably end up on one of your 2-way switches. You could also download the older Nano CPX manual (google it) and use the dx7 settings. Most should be the same except for the panic button.

If you get stumped, contact HH tech support. I'm sure they will help you out.

Cheers,
TomC

Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx

PM  EMAIL  GALLERY  Attn:RR  Quote
10-09-2017 01:30 AM  12 days agoPost 5
870heli

rrApprentice

Monson Ma. USA

My Posts: All  Forum  Topic

It is compatible and if it's not binding you probably are doing something wrong. Check your procedure over.
I went through that with a DX-8 and I think I used the DX-9 settings.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-09-2017 10:39 AM  11 days agoPost 6
mgfiest

rrNovice

Leamington Ontario Canada

My Posts: All  Forum  Topic

TomC... what i need is setup for the t hat DX7... input select ( aux2 and gear) what do I need

function list... do i use any of the prog mix settings, gyro sens, rev0 mix

reversing switch, if i leave all in normal, rudder is reverse and so is pitch

PM  EMAIL  Attn:RR  Quote
10-09-2017 12:08 PM  11 days agoPost 7
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

My Posts: All  Forum  Topic

You are best to try to research this yourself. With the new Safe tech it looks a bit complicated to program with the older DX7. Google something like, " blade nano cps with old dx7 setup " for some ideas.

Otherwise, you should contact HH tech support and ask them;

https://www.horizonhobby.com/conten...er-tech-support

Maybe you should have bought the RTF version? Or, maybe a good excuse to buy a nice new DX9 G2. Could be an early Xmas present, lol!

Good luck and cheers,
TomC

Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx

PM  EMAIL  GALLERY  Attn:RR  Quote
10-13-2017 12:41 PM  7 days agoPost 8
mgfiest

rrNovice

Leamington Ontario Canada

My Posts: All  Forum  Topic

apparently HH claims the dx7 was never intended to work with the nano. features not supported with the dx7.

PM  EMAIL  Attn:RR  Quote
10-13-2017 10:54 PM  7 days agoPost 9
870heli

rrApprentice

Monson Ma. USA

My Posts: All  Forum  Topic

I am surprised, but nothing last forever. Looks like you have a new radio in your future. Radios are a pretty go deal now a days. And I think they have trade in deals right now.
Good luck

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 164 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Spektrum DSM › Older Version Spektrum DX7
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, October 21 - 2:24 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online