RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 177 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › ikon 2 with jr x9503
08-30-2017 03:23 AM  81 days agoPost 1
enzyme

rrNovice

Joliette, Québec,​Canada

My Posts: All  Forum  Topic

hi,i purchased the ikon 2 and i have a old x9503. First i don't able to change the switch to put the rescue on trainer switch, butI am not able to program the three configurations and when I put the stabilization, two configuration remains on and I lose control of the device, is there anyone who is able to program the ikon 2 with jr x9503.
Thanks

PM  EMAIL  Attn:RR  Quote
08-30-2017 04:05 AM  81 days agoPost 2
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

Is there anything on the Ikon website that might have some info....or give you some hints?

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  GALLERY  Attn:RR  Quote
08-30-2017 02:02 PM  81 days agoPost 3
gt48

rrNovice

Kingston, Ontario -​Canada

My Posts: All  Forum  Topic

Here's an old thread about setting up banks on a brain with a 9503:

https://www.helifreak.com/showthread.php?t=496329

It's for the old brain v1 but I would guess it would work the same with ikon 2. Don't know about your rescue switch.

PM  EMAIL  Attn:RR  Quote
08-31-2017 01:53 AM  80 days agoPost 4
enzyme

rrNovice

Joliette, Québec,​Canada

My Posts: All  Forum  Topic

Thanks all, very interesting, with that I think I programmed my x9503 as needed.

PM  EMAIL  Attn:RR  Quote
08-31-2017 04:06 AM  80 days agoPost 5
Flyin for Jesus

rrVeteran

Dana Point, Ca.​92629

My Posts: All  Forum  Topic

I rewired the momentary trainer switch for my bailout ( not using Icon though )
With the limited JR programming capabilities, you cannot select that switch for anything. But you can use the rudder dual rate switch for several functions. So I swapped the wires for the 2 switches and just select rudder dual rate switch and its on the momentary trainer switch.
When I swapped them, I used connectors in the middle of the wires, this way I can switch them back in about 2 minutes if I ever need to.

PM  EMAIL  Attn:RR  Quote
09-02-2017 06:32 PM  77 days agoPost 6
enzyme

rrNovice

Joliette, Québec,​Canada

My Posts: All  Forum  Topic

OK
I made all the fixes to have my three configurations and my auxiliary on the momentary switch, until all is well but it is when I put swicth for the rescue, the Helicoptere goes abruptly to the right. would it have something that I did not program properly in the software, because I have no vibration, it is the same as if the module was wrong place, as I could see it is only on the ailerons that happens.
Thanks

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 177 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › ikon 2 with jr x9503
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, November 19 - 5:30 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online